CORE AS-CONDENSER 1323968 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-0520     Driver Group     1    
B     -     Cat Advanced 3 Moly     1    
Illustration 1 g01234069
Use Tooling (A) to install lip seal (7) in bearing cage (2). Be sure that lip seal (7) contacts the counterbore in bearing cage (2) .
Illustration 2 g01234063
Use Tooling (A) to install roller bearing (6) in bearing cage (2). Be sure that roller bearing (6) contacts the counterbore in bearing cage (2) .
Install O-ring seal (5) in bearing cage (2) .
Illustration 3 g01234061
Use Tooling (A) to install lip seal (4) in bearing retainer (1). Be sure that lip seal (4) contacts the counterbore in bearing retainer (1) .
Apply Tooling (B) to lip seals (4) and (7) and roller bearing (6) .
Illustration 4 g01234058
Install bearing retainer (1) on bearing cage (2) .
Install two bolts (3) and the washers that secure bearing retainer (1) to bearing cage (2) .End By: Install the front drive shaft and support bearing. Refer to Disassembly and Assembly, "Drive Shaft Support Bearing (Front) - Assemble".