1530215 CORE AS-RADIATOR Caterpillar parts
3508B
Rating:
Alternative (cross code) number:
CA1530215
153-0215
1530215
CA1530215
153-0215
1530215
Weight: 192 pounds 87 kg.
GENERATOR SET,
Compatible equipment models: 1530215:
Number on catalog scheme:
2
For full view, you need register
Information:
This diagnostic code is recorded when the Machine ECM determines that the reverse solenoid for the left pump requires calibration. This diagnostic code will only appear when the Machine ECM has been replaced or new software has been flashed into the Machine ECM.System Response:An active only level 1 warning is generated.Test Step 1. CALIBRATE THE SOLENOID
Perform the calibration procedure for the solenoid. For 953D, refer to Testing and Adjusting, KENR5172, "Calibration". For 963D, refer to Testing and Adjusting, KENR6373, "Calibration". For 973D, refer to Testing and Adjusting, KENR6524, "Calibration". Expected Result:The calibration procedure for the solenoid was performed successfully.Results:
YES - The calibration procedure for the solenoid was performed successfully. Resume normal machine operation.STOP
NO - The calibration procedure for the solenoid was not performed successfully. Repair: Repeat the calibration procedure for the solenoid. For 953D, refer to Testing and Adjusting, KENR5172, "Calibration". For 963D, refer to Testing and Adjusting, KENR6373, "Calibration". For 973D, refer to Testing and Adjusting, KENR6524, "Calibration".STOP
Perform the calibration procedure for the solenoid. For 953D, refer to Testing and Adjusting, KENR5172, "Calibration". For 963D, refer to Testing and Adjusting, KENR6373, "Calibration". For 973D, refer to Testing and Adjusting, KENR6524, "Calibration". Expected Result:The calibration procedure for the solenoid was performed successfully.Results:
YES - The calibration procedure for the solenoid was performed successfully. Resume normal machine operation.STOP
NO - The calibration procedure for the solenoid was not performed successfully. Repair: Repeat the calibration procedure for the solenoid. For 953D, refer to Testing and Adjusting, KENR5172, "Calibration". For 963D, refer to Testing and Adjusting, KENR6373, "Calibration". For 973D, refer to Testing and Adjusting, KENR6524, "Calibration".STOP
Caterpillar parts catalog:
Parts core Caterpillar catalog:
2930007
CORE AS
3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, G3408, G3408B, G3412, G3508, G3512, G3516
3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, G3408, G3408B, G3412, G3508, G3512, G3516
2930008
CORE AS
3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, G3408, G3408B, G3412, G3516
3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B, 3516C, G3408, G3408B, G3412, G3516
2930009
CORE AS
3408, 3408C, 3408E, 3412, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C32, G3408, G3408B, G3412
3408, 3408C, 3408E, 3412, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C32, G3408, G3408B, G3412
3508, 3508B, 3508C, 5130, 5130B, 776C, 776D, 777, 777B, 777C, 777D, 854G, 992G, D11N, D11R, G3508, G3508B, PM3508
3508, 3508B, 3512B, 3516, 3516B, 3516C, 5130B, 5230B, 776D, 777, 777B, 777C, 777D, 789, 789B, 789C, 789D, 854G, 992G, 994D, 994F, 994H, PM3508, PM3516, PP3516
1530208
CORE AS-RADIATOR
3508, 3508B
3508, 3508B
1530208
CORE AS-RADIATOR
3508, 3508B
3508, 3508B
2247721
CORE AS
3516B
3516B
2247720
CORE AS
3516B
3516B
1486896
CORE AS
3406C
3406C
1151664
CORE AS-AFTERCOOLER
G3412, G3412C
G3412, G3412C
1558062
CORE AS
3516B
3516B
1558061
CORE AS
3516, 3516B
3516, 3516B
1558059
CORE AS
3512B, 3516B
3512B, 3516B
1558068
CORE AS
3512B, 3516, 3516B
3512B, 3516, 3516B
1530216
CORE AS-RADIATOR
3512, 3512B, 3516
3512, 3512B, 3516