1634057 CORE AS-RADIATOR Caterpillar parts
D10T, D9R
Rating:
Alternative (cross code) number:
CA1634057
163-4057
1634057
CA1634057
163-4057
1634057
Weight: 34 pounds 15 kg.
Information:
CORE DEPTH
144
mm
CORE WIDTH
119
mm
FIN HEIGHT
1278.6
mm
FINS PER 25.4 MM
10
MODULE HEIGHT
1321
mm
NUMBER OF ROWS
6
NUMBER OF TUBES
60
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 1634057 Folded Core Radiators for Models D10T, D9R
CTP Reduce the cost of radiator repairs || Provide superior performance || Improved resistance
CTP Reduce the cost of radiator repairs || Provide superior performance || Improved resistance
All States Radiator Core fits Caterpillar D9R 163-4057 6I-2433
All States Compatible with Caterpillar Crawler Dozer(s) D9R || Replaces Caterpillar OEM Number(s) 163-4057, 6I-2433 || Core Type: "R" Series Core || Core Length: 50-5/16" || Overall Length: 52-1/16"
All States Compatible with Caterpillar Crawler Dozer(s) D9R || Replaces Caterpillar OEM Number(s) 163-4057, 6I-2433 || Core Type: "R" Series Core || Core Length: 50-5/16" || Overall Length: 52-1/16"
All States Radiator Core fits Caterpillar D9R 163-4057 6I-2433
All States Compatible with Caterpillar Crawler Dozer(s) D9R || Replaces Caterpillar OEM Number(s) 163-4057, 6I-2433 || Core Type: "R" Series Core || Core Length: 50-5/16" || Overall Length: 52-1/16"
All States Compatible with Caterpillar Crawler Dozer(s) D9R || Replaces Caterpillar OEM Number(s) 163-4057, 6I-2433 || Core Type: "R" Series Core || Core Length: 50-5/16" || Overall Length: 52-1/16"
Number on catalog scheme:
5
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-3052 Degree Wheel 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00974873
Install the upper connecting rod bearing (4) in the connecting rod. The upper connecting rod bearing must be centered in the connecting rod. Lubricate the bearing face with clean engine oil.
Pull the connecting rod into position against the crankshaft.Note: Do not allow the connecting rod to contact the piston cooling jet.
Clean the connecting rod cap (2) and the lower connecting rod bearing (3) . Lubricate the bearing face with clean engine oil.
Install the lower connecting rod bearing (3) in the connecting rod cap (2) . The lower connecting rod bearing must be centered in the connecting rod cap. Lubricate the bearing face with clean engine oil.Note: The connecting rod is a forging. The connecting rod has been hydraulically split in order to separate the connecting rod cap and the connecting rod. This process provides accurately matched surfaces. Do Not mix the connecting rod cap and the connecting rod.Note: Ensure that the etched number on connecting rod bearing cap (2) matches the etched number on the connecting rod (5) . Ensure that the numbers (Y) are on the same side.
Illustration 2 g00974602
Install the connecting rod cap (2) .
Install new setscrews (1) in the connecting rod.Note: Do not reuse the old setscrews in order to secure the connecting rod cap.
Tighten the setscrews evenly to a torque of 18 N m (13 lb ft).
Tighten the setscrews evenly to a torque of 70 N m (52 lb ft).
Use the Tooling (A) to achieve the correct final torque.Note: If the Tooling (A) is not used, place an index mark on each setscrew.
Turn the setscrews for an additional 120 degrees.
Rotate the crankshaft in order to ensure that there is no binding.
Repeat Steps 1 through 11 for the remaining connecting rod bearings.End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-3052 Degree Wheel 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00974873
Install the upper connecting rod bearing (4) in the connecting rod. The upper connecting rod bearing must be centered in the connecting rod. Lubricate the bearing face with clean engine oil.
Pull the connecting rod into position against the crankshaft.Note: Do not allow the connecting rod to contact the piston cooling jet.
Clean the connecting rod cap (2) and the lower connecting rod bearing (3) . Lubricate the bearing face with clean engine oil.
Install the lower connecting rod bearing (3) in the connecting rod cap (2) . The lower connecting rod bearing must be centered in the connecting rod cap. Lubricate the bearing face with clean engine oil.Note: The connecting rod is a forging. The connecting rod has been hydraulically split in order to separate the connecting rod cap and the connecting rod. This process provides accurately matched surfaces. Do Not mix the connecting rod cap and the connecting rod.Note: Ensure that the etched number on connecting rod bearing cap (2) matches the etched number on the connecting rod (5) . Ensure that the numbers (Y) are on the same side.
Illustration 2 g00974602
Install the connecting rod cap (2) .
Install new setscrews (1) in the connecting rod.Note: Do not reuse the old setscrews in order to secure the connecting rod cap.
Tighten the setscrews evenly to a torque of 18 N m (13 lb ft).
Tighten the setscrews evenly to a torque of 70 N m (52 lb ft).
Use the Tooling (A) to achieve the correct final torque.Note: If the Tooling (A) is not used, place an index mark on each setscrew.
Turn the setscrews for an additional 120 degrees.
Rotate the crankshaft in order to ensure that there is no binding.
Repeat Steps 1 through 11 for the remaining connecting rod bearings.End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar parts catalog:
Parts core Caterpillar catalog:
24H, 3412, 3412C, 3412D, 3412E, 374F L, 385C, 390F L, 5110B, 651E, 657E, 657G, 770G, 770G OEM, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC,...
16G, 16H NA, 245, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3456, 375, 375 L, 5080, 578, 583R, 587R, 589, 621E, 621F, 621G, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631D, 631E, 631G, 633E II, 6...
834K, 836K, 988K, D8L, D9N, D9R, D9T
D8L, D9N, D9R
24H, D10N, D10R, D8L, D9N, D9R
D10N, D10R, D10T, D9R, D9T
D10N, D10R, D10T, D9L
D10N, D10R, D10T, D9T
D10N, D10R, D10T
D10N, D10R, D10T
D10R, D9R
1887475
CORE AS-RADIATOR
D10R, D9R
D10R, D9R
24H, D10N, D10R, D8L, D9N, D9R
D11R, D11T
2289606
CORE AS-RADIATOR
D11R, D11T
D11R, D11T
D10N, D10R, D10T, D9R, D9T