CORE AS- 1634515 - Caterpillar

Illustration 1 g02865536
Table 1
Specification for 382-8819 Blade and Mounting Gp and 382-8822 Blade and Mounting Gp
Item Qty Part Specification Description
- - - All surface of bores and threads must be free of rust, primer, and paint. Before assembly, coat all the bores, pins, and sealing lip with 5P-0960 Grease Cartridge. After assembly, apply 5P-0960 Grease Cartridge to all the joints from fitting.
1 1 137-9097 Pin As Diameter is 59.89 0.03 mm (2.358 0.001 inch).
2 1 137-9269 Pin As Diameter is 59.89 0.03 mm (2.358 0.001 inch).
3 2 8T-4179 Bolt Torque to 70 15 N m (52 11 lb ft).
4 2 5I-9543 Pin Diameter is 44.885 0.025 mm (1.7671 0.0010 inch).
5 4 093-1430 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Assemble the lip type seals so that seals dose not extend past boss face.
6 2 8T-4244 Nut Position the nut (7) to the distance 0.0 to 1.0 mm (0.00 to 0.04 inch) past the end of the bolt. For locking, tighten the nut (6) against the nut (7).
7 2 8T-4244 Nut
Illustration 2 g02865537
Table 2
Item Qty Part Specification Description
8 2 218-5429 Bushing Bore surfaces must be free of paint and grease prior to assembly of bushings. Coat bores and bushings with 5P-0960 Grease Cartridge after the assembly of bushings.
Bore diameter before assembly is 45.200 0.015 mm (1.7795 0.0006 inch).
Installation depth is 5.0 0.8 mm (0.20 0.03 inch).
9 17 3F-5108 Bolt Torque to 270 40 N m (199 30 lb ft)