CORE AS-RADIATOR 1896674 - Caterpillar

Illustration 8 g01420030
Apply Tooling (E) onto bolts (28). Position wear pads (29) and install bolts (28) onto block (25) and bar (26). Tighten bolts (28) to a torque of 30 7 N m (22 5 lb ft).
Illustration 9 g01419729
Install mount assembly (27). Install bar (26) and block (25). Install bolts (24) .
Illustration 10 g01419906
Illustration 11 g01419901
Apply Tooling (E) onto bolts (22). Position wear pads (29) and install bolts (22) onto bar (21) and block (20). Tighten bolts (22) to a torque of 30 7 N m (22 5 lb ft).
Illustration 12 g01419720
Install bar (21). Install block (20). Install bolts (19) .
Illustration 13 g01419474
install bar (12) into link assembly (15) .
Apply Tooling (E) onto bolts (16). Position wear pads (17) and install bolts (16). Tighten bolts (16) to a torque of 15 3 N m (11 2 lb ft). Repeat this step for the remaining wear pads.
Illustration 14 g01419469
Illustration 15 g01419470
Use a suitable lifting device in order to install bar (12) and link assembly (15). Install bolts (14). Install bolts (13) .
Illustration 16 g01419431
Use a suitable lifting device in order to position cylinder (9). Install pin (11). Install bolt (10) .
Illustration 17 g01419428
Connect hose assemblies (8) .
Illustration 18 g01419424
Install cylinder (3). Install retainer (7). Install retaining ring (6).
Illustration 19 g01419390
Position cylinder (3). Install pin (5). Install bolt (4) .
Illustration 20 g01419388
Connect hose assemblies (2) .
Illustration 21 g01417053
Raise bucket (1) .End By:
Install the swing cylinders. Refer to Disassembly and Assembly, "Swing Cylinder - Remove and Install".
Install the swing frame. Refer to Disassembly and Assembly, "Swing Frame - Install".