2040983 CORE AS-RADIATOR Caterpillar parts
330C, 330C FM, 330C L, 330C MH
Rating:
Alternative (cross code) number:
CA2040983
204-0983
2040983
CA2040983
204-0983
2040983
Weight: 81 pounds 36 kg.
Information:
CORE DEPTH
85
mm
CORE HEIGHT
1050
mm
CORE WIDTH
826
mm
HEIGHT BOTTOM TANK
80
mm
HEIGHT OF TOP TANK
80
mm
NUMBER OF TUBE ROWS
0
EXCAVATOR, MOBILE HYD POWER UNIT,
You can buy:
US$1,200.62
28 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
ALLOYWORKS OE 210-8001 Radiator Compatible with CAT ERPILLAR E330C 330C E336CL 2108001 2049883 204-0983 Radiators
AW ALLOYWORKS [Vehicle Fitment] Replacement for CAT ERPILLAR E330C 330C E336CL; Replaces Part Number: 210-8001 204-9883 2108001 2049883; || [Specification] Overall Height：1225mm（Filler Neck and Cap Height Not Included） Overall Wide：845mm Overall Thickness:100mm || [Full Aluminum Radiator] Made from Aircraft AA5052 grade aluminum for prolonged lifespanand with raw aluminum finish. 2 mm thick full aluminum tanks and fittings, has a higher strength and greater corrosion resistance. || [Higher Density Core] Cooling rows are spaced 3/8" apart, giving you 25% more rows within the core than other aluminum radiators sold on Amazon. 14-16 cooling fins per inch,giving you approximately 1500 more cooling fins than other aluminum radiators. || [Strict Production Process] All radiator have to go through 5 checks in the whole process. Each radaitor will be tested before delivery to ensure no leakage. || [No Leaking Worries] 100% leaking and pressure tested. Thickened packing(either carton or wooden box), foam with shock absorption. || [Direct Replacement] Brand-new radiator engineered and manufactured to meet original specifications for quick installation. No Drilling or Modifications Needed for Installation.
AW ALLOYWORKS [Vehicle Fitment] Replacement for CAT ERPILLAR E330C 330C E336CL; Replaces Part Number: 210-8001 204-9883 2108001 2049883; || [Specification] Overall Height：1225mm（Filler Neck and Cap Height Not Included） Overall Wide：845mm Overall Thickness:100mm || [Full Aluminum Radiator] Made from Aircraft AA5052 grade aluminum for prolonged lifespanand with raw aluminum finish. 2 mm thick full aluminum tanks and fittings, has a higher strength and greater corrosion resistance. || [Higher Density Core] Cooling rows are spaced 3/8" apart, giving you 25% more rows within the core than other aluminum radiators sold on Amazon. 14-16 cooling fins per inch,giving you approximately 1500 more cooling fins than other aluminum radiators. || [Strict Production Process] All radiator have to go through 5 checks in the whole process. Each radaitor will be tested before delivery to ensure no leakage. || [No Leaking Worries] 100% leaking and pressure tested. Thickened packing(either carton or wooden box), foam with shock absorption. || [Direct Replacement] Brand-new radiator engineered and manufactured to meet original specifications for quick installation. No Drilling or Modifications Needed for Installation.
2108001 Radiator 204-0983 Replacement for CAT ERPILLAR E330C 330C E336CL 2049883 210-8001 Aluminium Core Assy Radiator Water Tank
Korelox ISO/lATF16949 Certification - Aluminum Radiator, Excellent Cooling Performance, Perfect Fit || Vehicle Fitment - Water tank 2049883 aluminum radiator replacement for CAT ERPILLAR E330C 330C E336CL. Please check the vehicle fitment before you buy || Vehicle Radiator Size - 48.23''x 33.27'' x 3.94'' T | Part Number: 210-8001 204-9883 2108001 2049883 || All radiator have to go through 5 checks in the whole process. Each radaitor will be tested before delivery to ensure no leakage || 100% leaking and pressure tested. Thickened packing(wooden box), foam with shock absorption
Korelox ISO/lATF16949 Certification - Aluminum Radiator, Excellent Cooling Performance, Perfect Fit || Vehicle Fitment - Water tank 2049883 aluminum radiator replacement for CAT ERPILLAR E330C 330C E336CL. Please check the vehicle fitment before you buy || Vehicle Radiator Size - 48.23''x 33.27'' x 3.94'' T | Part Number: 210-8001 204-9883 2108001 2049883 || All radiator have to go through 5 checks in the whole process. Each radaitor will be tested before delivery to ensure no leakage || 100% leaking and pressure tested. Thickened packing(wooden box), foam with shock absorption
Qyljday Water Tank Radiator 204-0983 For Caterpillar CAT 330C 330C FM 330C L 330C MH
Qyljday 1️⃣The Listing Includes: 1x Radiator || 2️⃣Replaces Part Number: 204-0983,2040983 || 3️⃣Application: Fits For Caterpillar CAT Excavator 330C 330C FM 330C L 330C MH || 4️⃣Warranty:1 Year || 5️⃣Guaranteed Exact Fit for easy installation
Qyljday 1️⃣The Listing Includes: 1x Radiator || 2️⃣Replaces Part Number: 204-0983,2040983 || 3️⃣Application: Fits For Caterpillar CAT Excavator 330C 330C FM 330C L 330C MH || 4️⃣Warranty:1 Year || 5️⃣Guaranteed Exact Fit for easy installation
Number on catalog scheme:
9
For full view, you need register
Compatible equipment models: 2040983:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
If the engine has guards, remove the guards. Refer to the Original Equipment Manufacture (OEM) for the correct procedure. Note: Mark the direction of rotation of the alternator belt if the belt will be reused.
Illustration 1 g02017213
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
Illustration 2 g02017213
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Ensure that the belt tensioner, pulleys, and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt.
Ensure that all components of the belt tensioner, pulleys, and guide rollers are clean and free from wear and damage. If necessary, replace any components that are worn or damaged. Refer to Disassembly and Assembly, "Belt Tensioner - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Flat Idler Pulley) - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Grooved Idler Pulley) - Remove and Install" for the correct procedure.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the grooves of all pulleys.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
If the engine has guards, remove the guards. Refer to the Original Equipment Manufacture (OEM) for the correct procedure. Note: Mark the direction of rotation of the alternator belt if the belt will be reused.
Illustration 1 g02017213
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
8 mm (0.31 inch) Ø by 85 mm (3.35 inch) 1
Illustration 2 g02017213
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Ensure that the belt tensioner, pulleys, and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt.
Ensure that all components of the belt tensioner, pulleys, and guide rollers are clean and free from wear and damage. If necessary, replace any components that are worn or damaged. Refer to Disassembly and Assembly, "Belt Tensioner - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Flat Idler Pulley) - Remove and Install" for the correct procedure.Refer to Disassembly and Assembly, "Idler Pulley (Grooved Idler Pulley) - Remove and Install" for the correct procedure.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation. Note: The ribs on the alternator belt must be located into the grooves of all pulleys.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.
Caterpillar parts catalog:
Parts core Caterpillar catalog:
12H, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 3...
1616880
CORE
305.5, 312B L, 312D, 315B L, 315C, 315D L, 320C, 320D, 320D GC, 322B LN, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325B L, 325C, 325D, 325D L, 330B L, 330C L, 330D, 330D L, 330D LN, 336D L, 345B I...
305.5, 312B L, 312D, 315B L, 315C, 315D L, 320C, 320D, 320D GC, 322B LN, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325B L, 325C, 325D, 325D L, 330B L, 330C L, 330D, 330D L, 330D LN, 336D L, 345B I...
311B, 312B, 312C, 312C L, 315C, 318B, 318C, 319C, 320B, 320C, 320C FM, 320C L, 322C, 325B, 325C, 330C, 330C L, 345B II, 365B, 365B L, 385B
312C, 312C L, 315C, 318C, 319C, 320C, 320C FM, 320C L, 322C, 325C, 330C, 330C L
2112024
CORE AS
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH
330C, 330C L
2112021
CORE AS-RADIATOR
330C, 330C L
330C, 330C L
2112022
CORE AS-AFTERCOOLER
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH
2925709
CORE AS-OIL COOLER
330C, 330C L
330C, 330C L
2419554
CORE AS-RADIATOR
330C FM, 330C L, 330C MH
330C FM, 330C L, 330C MH
2451863
CORE AS-AFTERCOOLER
330C FM, 330C L, 330C MH
330C FM, 330C L, 330C MH
7S2509
CORE ASSEM.
824B
824B
12H ES, 12H NA, 140H ES, 140H NA, 14H NA, 160H ES, 160H NA, 16H NA
2380417
CORE AS-HEATER
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA
1234595
CORE-VALVE
120G
120G
2197496
CORE AS-CONDENSER
120G, 12G, 130G, 140G
120G, 12G, 130G, 140G
330C, 330C L
2112024
CORE AS
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH