CORE AS 2044407 - Caterpillar

Illustration 1 g01109579
High Flow Connections (Early models)
Illustration 2 g02571199
High Flow Connections (Later models)
For all High Flow work tools, refer to Operation and Maintenance Manual, "Joystick and Auxiliary Hydraulic Controls". Connect the wiring harness to the electrical plug (1).Note: If your High Flow work tool does not have a wiring harness, a Jumper Plug should be installed on the electrical plug (1) for the work tool control. Without this Jumper Plug, the machine will not provide High Flow to the work tool. Consult your Cat for the correct part number for your machine.Simple Hydromechanical Work Tools
Work tools in the following table are approved by Cat. Refer to Operation and Maintenance Manual, "Joystick and Auxiliary Hydraulic Controls" for the location and operation of the joystick controls that are referenced in the table.Read the manual and understand the instructions and warnings in the Operation and Maintenance Manual for these work tools. Consult your Cat dealer for replacement manuals. Proper care is your responsibility.
Table 1
Operation of Cat Simple Hydromechanical Work Tools
Work Tool Joystick Control Actions
A 5 6 1 2 3 4 7
Multipurpose Bucket X The bucket clam closes.
X The bucket clam opens.
All Grapple tools X The grapple closes.
X The grapple opens.
Angle Blade X The blade angles to the left.
X The blade angles to the right.
Dozer Blade X The blade angles to the left.
X The blade angles to the right.
X X The blade tilts down to the left.
X X The blade tilts down to the right.
X X The blade tilts down to the left and the blade angles to the left.
X X The blade tilts down to the right and the blade angles to the right. Proper operation of the work tool is your responsibility. Do not use the work tool improperly.Please follow the instructions that are listed below in order to use the grapple tools safely.
Do not pry with one rake tine. Use multiple rake tines in order to loosen material.
Remove the work tool from the machine before you lift the host machine. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for details.
Do not place the weight of the host machine on the grapples in the open position.Complex Hydromechanical Work Tools
Note: For the functionality of Cat Complex Work Tools, please read the Operation and Maintenance Manual for the work tool.Consult your Cat dealer for replacement manuals. Please read all the safety messages and understand all the safety messages for each work tool.