CORE AS-RADIATOR 2246323 - Caterpillar

Start By:
Remove the radiator tank. Refer to Disassembly and Assembly, "Radiator Tank - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01351552
Remove bolts (1) .
Remove bolts (3) .
Remove bracket assembly (2) .
Illustration 2 g01351554
Illustration 3 g01259672
Loosen clamps (6) and disconnect hoses (7) .
Remove bolts (4) . Remove retainer (5) and the spacer.
Use Tooling (A) and a suitable lifting device in order to remove radiator core (8) . The weight of radiator core (8) is approximately 27 kg (59 lb).
Illustration 4 g01259684
Remove seal (9) and discard seal (9) .
Repeat Steps 4 through 7 for the remaining radiator cores.Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     178-3704     Lifting Bracket As     1    
B     207-1600 (1)     Rubber Lubricant     -    
207-1601 Rubber Lubricant     -    
( 1 ) For EAME Only
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Refer to Special Instruction, REHS0047, "Assembly Procedure for the Advanced Modular Cooling System (AMOCS) Radiator Core in Track-Type Tractors" for additional information.
Illustration 5 g01259684
Apply Tooling (B) to new seal (9) and install new seal (9) .
Illustration 6 g01259672
Illustration 7 g01351554
Use Tooling (A) and a suitable lifting device in order to position radiator core (8) . The weight of radiator core (8) is approximately 27 kg (59 lb).
Position retainer (5) and the spacer. Install bolts (4) .
Connect hoses (7) and tighten clamps (6) .
Repeat Steps 1 through 4.
Illustration 8 g01351552
Position bracket assembly (2) .
Install bolts (3) .
Install bolts (1) .End By: Install the radiator tank. Refer to Disassembly and Assembly, "Radiator Tank - Remove and Install".