CORE AS-HYDRAULIC OIL COOLER 2351017 - Caterpillar

Illustration 1 g03833068
Table 1
Specification for 297-5609 Rear Suspension Gp
Item Qty Part Specification Description
1 2 115-9310 Suspension Cover Wrap the cover around the housing. Position the seam toward the centerline of the truck.
2 4 150-3772 Pin Diameter is 126.975 0.025 mm (4.9990 0.0010 inch).
3 2 5M-6214 Pipe Plug Plug is on the bottom of each rear suspension cylinder. Assemble the grease line to the hole that is positioned toward the axle housing. Plug the outboard hole.
4 4 150-3982 Plate Assemble the plate with the lube holes as shown in Illustration 1.
Illustration 2 g03833637
View B-B
Table 2
Item Qty Part Specification Description
5 4 440-2667 Valve As Tighten the main valve body to 13.6 0.5 N m (120.4 4.4 lb in).
Tighten the valve swivel nut closure to 6.8 0.5 N m (60.2 4.4 lb in) and valve cap to 2.3 0.5 N m (20.4 4.4 lb in) after charging. 295-5709 Rear Suspension Gp
Illustration 3 g03833071
Table 3
Item Qty Part Specification Description
6 1 320-2510 O-Ring Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
7 1 366-0231 Backup Ring Lubricate the sealing lip lightly with the lubricant that is being sealed.
8 1 312-4249 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
9 1 202-0969 Backup Ring Lubricate the sealing lip lightly with the lubricant that is being sealed.
10 1 9X-7352 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
E 1 194-6859 Head As Bore over two lands is 317.68 0.03 mm (12.507 0.001 inch).
F 1 301-3133 Hydraulic Cylinder Rod As Diameter is 317.425 0.050 mm (12.4970 0.0020 inch).
G 1 203-9828 Cylinder As Bore is 362.00 0.20 mm (14.252 0.008 inch).
11 - - Before assembly, apply green Loctite 609 to wiper seal groove.