CORE AS-CONDENSER 2353167 - Caterpillar

Sound Level Information
The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when "ANSI/SAE J1166 FEB 2014" is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. The sound level may vary during diesel particulate filter regeneration.Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.The average exterior sound pressure level is 75 dB(A) when the "SAE J88 JUNE 2013 - Constant Speed Moving Test" procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and “the machine moving forward in an intermediate gear ratio”. The sound level may vary during diesel particulate filter regeneration.The average exterior sound pressure level is 76 dB(A) when the "SAE J88 JUNE 2013 - Stationary Tests with Maximum Governed Engine Speed" procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and “fast cycle front hydraulic operation”. The sound level may vary during diesel particulate filter regeneration.Note: When digging with the backhoe, the maximum recommended operating engine speed is 1900 rpm.Sound Level Information for Machines in European Union Countries and in Countries that Adopt the "EU Directives"
Note: The information below applies only to machines that have the CE mark on the PIN plate.The dynamic operator sound pressure level is 74 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. The sound level may vary during diesel particulate filter regeneration."The European Union Physical Agents (Vibration) Directive 2002/44/EC"
Vibration Data for Backhoe Loaders
Information Concerning Hand/Arm Vibration Level
When the machine is operated according to the intended use, the hand/arm vibration of this machine is below 2.5 m/s2.Information Concerning Whole Body Vibration Level
This section provides vibration data and a method for estimating the vibration level for backhoe loaders.The expected vibration levels can be estimated with the information in Table 1 to calculate the daily vibration exposure. A simple evaluation of the machine application can be used. For typical operating conditions, use the average vibration levels as the estimated level. With an experienced operator and smooth terrain, subtract the Scenario Factors from the average vibration level to obtain the estimated vibration level. For aggressive operations and severe terrain, add the Scenario Factors to the average vibration level to obtain the estimated vibration level.Note: All vibration levels are in meter per second squared.
Table 1
"ISO Reference Table A - Equivalent