CORE AS-RADIATOR 2412906 - Caterpillar

Rear Suspension Group
Table 1
Parts that are removed from the 192-0559 Rear Suspension Gp and 192-0560 Rear Suspension Gp    
Item     Qty     Part Number     Description    
1     2     184-8058     Covers    
2     4     8T-0649     Bolts    
3     4     8T-0359     Bolts    
Illustration 1 g01871817
Typical example for the former rear suspension group without retainer
Table 2
New parts that are added to the 192-0559 Rear Suspension Gp and 192-0560 Rear Suspension Gp    
Item     Qty     Part Number     Description    
4     8     279-9809     Retainers    
5     8     8T-0282     Bolts    
Illustration 2 g01871818
Typical example for the rear suspension group with new 279-9809 Retainer (4) Install the retainers (4) by using bolts (5) and 9X-8268 Washers .Front Suspension Group
Table 3
New parts that are added to the 191-8042 Front Suspension Gp    
Item     Qty     Part Number     Description    
7     6     279-9808     Retainers    
8     6     6V-3940     Bolts    
9     6     9M-1974     Hard Washers    
Illustration 3 g01872036
Front suspension group with new 279-9808 Retainer (7)
Illustration 4 g01872038
Housing assemblyView C-CIf the housing assembly (6) is not equipped with holes for the bolts (8), drill six holes to dimension (H) to a depth of 25.0 mm (0.98 inch). Tap the holes to M8 X 1.25 to a minimum depth of 17 mm (0.7 inch). The holes should be equally spaced on the diameter (D) to the lower face of the housing assembly. Refer to Illustration 4. Assemble the retainers (7) to the housing assembly by using bolts (8) and hard washers (9) .Dimension (D) ... 457.2 mm (18.00 inch)Dimension (E) ... 197.97 mm (7.794 inch)Dimension (F) ... 228.6 mm (9.00 inch)Dimension (G) ... 114.3 mm (4.50 inch)Dimension (H) ... 7.0 mm (0.28 inch)