CORE AS 2423219 - Caterpillar

Illustration 1 g01637375
Release rubber latches (1). Repeat this step for the opposite side.
Raise hood assembly (2). Secure hood assembly (2) in the open position.
Illustration 2 g01704794
Remove elbows (3).
Illustration 3 g01638057
Illustration 4 g01704856
Attach Tooling (A) and a suitable lifting device onto rear hood assembly (4). The weight of rear hood assembly (4) is approximately 431 kg (950 lb).
Illustration 5 g01638073
Disconnect hose (5). Remove tube (6).
Illustration 6 g01704897
Disconnect hose (7). Remove tube (8).
Illustration 7 g01704913
Remove bolt (9), washer (10), and mount assembly (11). Repeat this step for the remaining mount assemblies.
Remove rear hood assembly (4). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 4
Illustration 8 g01638057
Illustration 9 g01704856
Use Tooling (A) and a suitable lifting device in order to install rear hood assembly (4). The weight of rear hood assembly (4) is approximately 431 kg (950 lb).
Illustration 10 g01704913
Install mount assembly (11), washer (10), and bolt (9). Repeat this step for the remaining mount assemblies.
Illustration 11 g01704897
Install tube (8). Connect hose (7).
Illustration 12 g01638073
Install tube (6). Connect hose (5).
Illustration 13 g01704794
Install elbows (3).
Illustration 14 g01637375
Lower hood assembly (2).
Secure rubber latches (1). Repeat this step for the opposite side. End By:
Remove the truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Remove the front wheel chocks and the rear wheel chocks. Refer to Disassembly and Assembly, "Wheel Chocks (Front and Rear) - Remove and Install".