CORE AS-RADIATOR 2482075 - Caterpillar

Illustration 46 g02804956
Install pump head (24) and bolts (23). Tighten bolts (23) to a torque of 130 15 N m (96 11 lb ft).
Illustration 47 g02804943
Install spring (22) and O-ring seals (21).
Illustration 48 g02804941
Install spring (20).
Illustration 49 g02804938
Install nut (19). Tighten nut (19) to a torque of 10 1 N m (89 9 lb in). Ensure that Dimension (X) is maintained.
Illustration 50 g02804936
Install cap (18).
Illustration 51 g02804916
Install retainer (17), bushing (16), dowel (15), spring (14), and O-ring seal (13).
Illustration 52 g02804903
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install valve (12) and bolts (11). Tighten bolts (11) to a torque of 37 5 N m (27 4 lb ft).
Illustration 53 g02805317
Install valve (10).
Illustration 54 g02804898
Install plunger (9). Tighten plunger (9) to a torque of 10 3 N m (89 27 lb in).
Illustration 55 g02804896
Install nut (8). Tighten nut (8) to a torque of 5 1 N m (44 9 lb in).
Illustration 56 g02804877
Install Alan pin (7) (not shown). Tighten Alan pin (7) to a torque of 30 N m (22 lb ft).
Illustration 57 g02804736
Install piston (6).
Illustration 58 g02804720
Install bolt (5). Tighten bolt (5) to a torque of 87 20 N m (64 15 lb ft). Install O-ring seal (4).
Illustration 59 g02804719
Install O-ring seal (3) onto valve (2).
Illustration 60 g02804717
Install valve (2) and install bolts (1). End By:
Install the front hydrostatic piston motor.