CORE ASSEMBLY-A/C CONDENSER 2663275 - Caterpillar

Illustration 1 g00845773
Attach Tooling (A) to the fan group, as shown.
Attach a suitable hoist and lifting slings to Tooling (A) .
Illustration 2 g00845783
Remove bolt (1), the washer, and the clip.
Remove two bolts (2) and the washers.
Illustration 3 g00845787
Remove two bolts (3) and the washers.
Illustration 4 g00845797
Remove two bolts (4) and the washers.
Illustration 5 g00845808
Remove two bolts (5) and the washers.
Use the hoist in order to carefully remove the fan group.Note: The following steps are used in order to remove the fan shroud.
Illustration 6 g00845816
Remove two bolts (6) and the washers.
Illustration 7 g00845821
Remove four bolts (7), the washers, and the clamps. Repeat this procedure for the opposite side.
Carefully remove fan shroud (8) .
Illustration 8 g00845828
Remove grommet (10) .
Remove hose assembly (9) .Note: The following steps are used in order to remove the fan blade.
Illustration 9 g00845835
Remove eight bolts (11) and the washers.
Carefully remove fan blade (12) .Note: The following steps are used in order to remove the fan motor.
Illustration 10 g00845845
Remove deflector (13) .
Remove nut (14) and the washer.
Illustration 11 g00845866
Install Tooling (B), as shown.
Use Tooling (B) in order to remove adapter (15) .
Illustration 12 g00838115
Use a suitable hoist and lifting slings in order to turn over the fan guard.
Illustration 13 g00845852
Remove two bolts (16), the washers, and the clips.
Illustration 14 g00845855
Disconnect tube assemblies (19), (20), and (21) from hydraulic fan motor (17) .
Remove two bolts (18) and the washers.
Carefully remove hydraulic fan motor (17) .