3310301 CORE AS- Caterpillar parts
Rating:
Alternative (cross code) number:
CA3310301
331-0301
3310301
CA3310301
331-0301
3310301
Weight: 190 pounds 86 kg.
Related part:
3310301
CORE AS-OIL CLR
10R9997
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$52.37
11 Sep 2021
US: OmskForever
General Bearing Corporation 33103-01 Radial/Deep Groove Ball Bearing - Round Bore, 0.7500 in ID, 1.7500 in OD, 0.5780 in Width, Open, 1.9370 in Flange Diameter
GENERAL BEARING bore diameter: 0.7500 in || snap ring included: Without Snap Ring || outside diameter: 1.7500 in || dynamic load capacity: 1187 lb || overall width: 0.5780 in
GENERAL BEARING bore diameter: 0.7500 in || snap ring included: Without Snap Ring || outside diameter: 1.7500 in || dynamic load capacity: 1187 lb || overall width: 0.5780 in
$47.61
03 Jan 2021
-: -
General Bearing Corporation 33103-01 - Radial/Deep Groove Ball Bearing - Round Bore, 0.7500 in ID, 1.7500 in OD, 0.5780 in Width, Open
bore diameter: 0.7500 in || snap ring included: Without Snap Ring || outside diameter: 1.7500 in || dynamic load capacity: 1187 lb || overall width: 0.5780 in
bore diameter: 0.7500 in || snap ring included: Without Snap Ring || outside diameter: 1.7500 in || dynamic load capacity: 1187 lb || overall width: 0.5780 in
For full view, you need register
Information:
Procedure To Repair 14 To 12 Gauge Wires:
Follow the Special Instruction SEHS9065 for the preparation of the wire. Use the 1U- 5804 Hand Crimp Tool to secure the 8N-1540 Connector Pin and 8N-1541 Connector Socket to the wires. Insert the 8N-1541 Connector Socket into the 129-7163 Plug Assembly. Insert the 8N-1540 Connector Pin into the 129-7164 Receptacle Assembly. Make sure that both are locked into place by tugging on the wires. Mate the 129-7163 Plug Assembly and 129-7164 Receptacle Assembly together and make sure the locking feature is engaged. Secure the plug/receptacle assembly to the harness with a 3S-2093 Cable (Tie-Wrap) Strap. Tighten the cable strap by hand or use a 4C-5877 Cable Tie Tool which tightens and cuts off the excess cable strap at the same time.
The connector pin and socket can be removed from the plug and receptacle assemblies with a 4C-4073 Removal Tool.
Follow the Special Instruction SEHS9065 for the preparation of the wire. Use the 1U- 5804 Hand Crimp Tool to secure the 8N-1540 Connector Pin and 8N-1541 Connector Socket to the wires. Insert the 8N-1541 Connector Socket into the 129-7163 Plug Assembly. Insert the 8N-1540 Connector Pin into the 129-7164 Receptacle Assembly. Make sure that both are locked into place by tugging on the wires. Mate the 129-7163 Plug Assembly and 129-7164 Receptacle Assembly together and make sure the locking feature is engaged. Secure the plug/receptacle assembly to the harness with a 3S-2093 Cable (Tie-Wrap) Strap. Tighten the cable strap by hand or use a 4C-5877 Cable Tie Tool which tightens and cuts off the excess cable strap at the same time.
The connector pin and socket can be removed from the plug and receptacle assemblies with a 4C-4073 Removal Tool.
Parts core Caterpillar catalog:
3310299
CORE AS-
Caterpillar
Caterpillar
3284888
CORE AS-OCLR
Caterpillar
Caterpillar
3284693
CORE AS
Caterpillar
Caterpillar
3263498
CORE AS-
Caterpillar
Caterpillar
3263497
CORE AS-
Caterpillar
Caterpillar
3258571
CORE AS-AFCLR
Caterpillar
Caterpillar
3349128
CORE AS-COND
Caterpillar
Caterpillar
3342815
CORE AS-RDTR
Caterpillar
Caterpillar
3340910
CORE-COOLING
Caterpillar
Caterpillar
3310304
CORE AS-
Caterpillar
Caterpillar
3310303
CORE AS-
Caterpillar
Caterpillar
3310302
CORE AS-
Caterpillar
Caterpillar