3477611 CORE AS-AFTERCOOLER Caterpillar parts
320E, 320E L, 320E LN, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN
Rating:
Alternative (cross code) number:
CA3477611
347-7611
3477611
CA3477611
347-7611
3477611
Weight: 31 pounds 14 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
You can buy:
US$1,298.69
28 May 2025
FridayParts
Compatible equipment models: 3477611:
Number on catalog scheme:
11
For full view, you need register
Information:
Introduction
THE DIP TANK HAS BEEN DESIGNED TO ACT AS A PERIPHERAL PIECE OF SERVICE EQUIPMENT TO AN IDLER REBUILDER.THIS UNIT ENABLES THE OPERATOR TO ADD POST-WELDING PRESERVATIVE TO REBUILD ROLLERS WHILE THE WELDER IS REBUILDING ANOTHER ROLLER.Installation And Maintenance
The Dip Tank is shipped with the air cylinder removed and boxed separately. Use the illustration on page 10 as a guide for mounting the cylinder to the upper frame. Connect the copper tubing for the air line. After checking for equipment damage following shipping, locate the unit so that it fits into the repair shop's work flow system. In order to put the Dip Tank into service: THE ILLUSTRATION SHOWS A "TYPICAL" WORK FLOW SYSTEM WHICH INCLUDES THE END COLLAR PULLER AND THE ROLLER BUFFER.1. Add fluid to the system's oiler on the air line.2. Connect the shop air line to the Dip Tank's air system.3. Adjust the air regulator (item 2 on p. 13) to its operating pressure.4. The two needle valves (item 12 on p.13) should be opened slightly; then, run the work tray up and down while adjusting the needle valves to set the desired travel speed.5. Check that the plug in the base of the tank is closed.6. Fill the tank with preservative.7. The unit is now operational.
KEEP HANDS CLEAR OF THE WORKTABLE WHILE IT IS IN OPERATION.
IF THE VALVES ARE NOT SET PROPERLY, THE TABLE MAY DRIFT.Maintenance
Maintain the fluid level in the oiler and change as necessary.The work tray guide shafts will need to be cleaned in order to prevent a buildup of preservative that might stall the work tray.Replacement Parts
HOW TO ORDER PARTSAll parts listed herein may be ordered through the factory. Write or phone:PARTS ORDER DESK
WOLFF MANUFACTURING COMPANY
1611 Adrian Road
Burlingame, California 94010
Phone: (415) 692-5010
Telex: 349-414 Cable: SALENCO Burlingame
WHEN ORDERING, ALWAYS GIVE THE FOLLOWING INFORMATION:1) Part Number(s) listed on the component or assembly illustration. (Never order by Item Number or Code Number.)2) Complete Part Description.3) Serial Number found on the metal label of each machine.4) State quantity desired.5) State when delivery is required.6) List the manual identification number as shown in the bottom right hand corner of the introduction page.Selling prices will be furnished on request, or parts will be shipped at prevailing prices and you will be billed accordingly.Dip Tank Main Assembly
Main Assembly: Dip Tank Parts List
Dip Tank Air System
THE DIP TANK HAS BEEN DESIGNED TO ACT AS A PERIPHERAL PIECE OF SERVICE EQUIPMENT TO AN IDLER REBUILDER.THIS UNIT ENABLES THE OPERATOR TO ADD POST-WELDING PRESERVATIVE TO REBUILD ROLLERS WHILE THE WELDER IS REBUILDING ANOTHER ROLLER.Installation And Maintenance
The Dip Tank is shipped with the air cylinder removed and boxed separately. Use the illustration on page 10 as a guide for mounting the cylinder to the upper frame. Connect the copper tubing for the air line. After checking for equipment damage following shipping, locate the unit so that it fits into the repair shop's work flow system. In order to put the Dip Tank into service: THE ILLUSTRATION SHOWS A "TYPICAL" WORK FLOW SYSTEM WHICH INCLUDES THE END COLLAR PULLER AND THE ROLLER BUFFER.1. Add fluid to the system's oiler on the air line.2. Connect the shop air line to the Dip Tank's air system.3. Adjust the air regulator (item 2 on p. 13) to its operating pressure.4. The two needle valves (item 12 on p.13) should be opened slightly; then, run the work tray up and down while adjusting the needle valves to set the desired travel speed.5. Check that the plug in the base of the tank is closed.6. Fill the tank with preservative.7. The unit is now operational.
KEEP HANDS CLEAR OF THE WORKTABLE WHILE IT IS IN OPERATION.
IF THE VALVES ARE NOT SET PROPERLY, THE TABLE MAY DRIFT.Maintenance
Maintain the fluid level in the oiler and change as necessary.The work tray guide shafts will need to be cleaned in order to prevent a buildup of preservative that might stall the work tray.Replacement Parts
HOW TO ORDER PARTSAll parts listed herein may be ordered through the factory. Write or phone:PARTS ORDER DESK
WOLFF MANUFACTURING COMPANY
1611 Adrian Road
Burlingame, California 94010
Phone: (415) 692-5010
Telex: 349-414 Cable: SALENCO Burlingame
WHEN ORDERING, ALWAYS GIVE THE FOLLOWING INFORMATION:1) Part Number(s) listed on the component or assembly illustration. (Never order by Item Number or Code Number.)2) Complete Part Description.3) Serial Number found on the metal label of each machine.4) State quantity desired.5) State when delivery is required.6) List the manual identification number as shown in the bottom right hand corner of the introduction page.Selling prices will be furnished on request, or parts will be shipped at prevailing prices and you will be billed accordingly.Dip Tank Main Assembly
Main Assembly: Dip Tank Parts List
Dip Tank Air System
Caterpillar parts catalog:
Parts core Caterpillar catalog:
4I1539
CORE
303, 303.5, 303.5C, 303.5E, 303C CR, 304, 304.5, 304C CR, 304E, 305, 305.5, 305.5E, 305C CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR,...
303, 303.5, 303.5C, 303.5E, 303C CR, 304, 304.5, 304C CR, 304E, 305, 305.5, 305.5E, 305C CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR,...
303, 303.5, 303.5C, 303.5E, 303C CR, 304, 304.5, 304C CR, 304E, 305, 305.5, 305.5E, 305C CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR,...
3387728
CORE AS-FUEL COOLER
2384C, 2484C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320D GC, 320D L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 559C, 5...
2384C, 2484C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320D GC, 320D L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 559C, 5...
3639456
CORE AS-HEATER
312E, 312E L, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 34...
312E, 312E L, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 34...
324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 349E, 349E L, 349E L HVG, 349E L VG, 568 FM LL
3477612
CORE AS-OIL COOLER
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3477613
CORE AS-RADIATOR
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3391491
CORE AS-RADIATOR
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L
3391492
CORE AS-OIL COOLER
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L
4362712
CORE AS
586C
586C
4175984
CORE
2384C, 2484C, 559C, 579C
2384C, 2484C, 559C, 579C
3878630
CORE AS-FUEL COOLER
2864C, 586C
2864C, 586C
3878626
CORE AS
2864C, 586C
2864C, 586C
3878624
CORE AS-RADIATOR
2864C, 586C
2864C, 586C
320E LRR, 320E RR, 336F L, 374F L, 390F L
3550436
CORE AS-AFTERCOOLER
320E LRR, 320E RR
320E LRR, 320E RR
3391492
CORE AS-OIL COOLER
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L
3391491
CORE AS-RADIATOR
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L
320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L
3477613
CORE AS-RADIATOR
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3477612
CORE AS-OIL COOLER
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
324E, 324E L, 324E LN, 329E, 329E L, 329E LN