3507495 CORE AS-AFTERCOOLER Caterpillar parts
316E L, 318E L
Rating:
Alternative (cross code) number:
CA3507495
350-7495
3507495
CA3507495
350-7495
3507495
Weight: 29 pounds 13 kg.
EXCAVATOR,
Number on catalog scheme:
4
For full view, you need register
Information:
All 3200 Series Turbocharged Engines
The mounting holes in the cylinder head at location (A), used for a lifting eye bracket (or for other brackets), may be a different size than the original head; therefore rework and extra parts may be needed. Cylinder heads on earlier engines had bracket mounting holes with 3/8-16-2B threads. Later cylinder heads had bracket mounting holes with 1/2-13-2B threads.(1) If a cylinder head of the earlier type is replacing a later cylinder head, the replacement cylinder head will have 3/8"-16-2B threads in the mounting holes. Install the bracket with S1594 Bolts and 5M2894 Washers.(2) If a cylinder head of the later type is replacing an earlier cylinder head, the holes in the lifting eye bracket, and other brackets, must be enlarged to 13.0 mm Ø (0.53" Ø). Use 6H1717 Bolts and 5P8245 Washers to install the bracket on the replacement cylinder head.3208 Turbocharged Engines
(1) If the cylinder head is to be used on the left side of the engine, install a 9L7657 Cup Plug at location (A). If the cylinder head is to be used on the right side of the engine, install a 9L7657 Cup Plug at location (B). On all cylinder heads, install a 7H3181 Hex Countersunk Head Plug at location (C). Install 5M6213 Plugs at locations (D) as necessary. Due to the different size holes in earlier and later cylinder heads, install either a 2B858 or a 5M6214 Plug in the opening at (E).(2) Put the cylinder head in position on the engine. Put engine oil on the threads of the cylinder head bolts and install the bolts in their correct positions. Tighten the bolts in sequence and to the torque shown in the Service Manual.3204 Turbocharged Engines
Because two different water lines groups have been used on these engines, it may be necessary to obtain some additional parts. See Step 1 and the illustrations for the parts needed. (1) Install a 7H3171 Hex Countersunk Head Plug at location (A), a 9L7657 Cup Plug at location (B), and 5M6213 Plugs at locations (C) as necessary.(2) New vent line parts (not part of the cylinder head group) will be needed if the threaded hole at location (D) is a different size than the hole in the former cylinder head. See the illustrations for the parts needed to make a new vent line.(3) Put the cylinder head in position on the engine. Put engine oil on the threads of the cylinder head bolts, and install the bolts in their correct position. Tighten the bolts in sequence and to the torque shown in the Service Manual. Connect the vent lines as shown. Cylinder heads for 3204 Turbocharged Engines were originally built with a single valve spring per valve. This replacement cylinder head contains two valve springs per valve (double valve springs). However, this cylinder head group (with double valve springs) is directly adaptable for use on 3204 Turbocharged Engines. No changes or modifications are required. For replacement valve spring parts for this cylinder head group,
The mounting holes in the cylinder head at location (A), used for a lifting eye bracket (or for other brackets), may be a different size than the original head; therefore rework and extra parts may be needed. Cylinder heads on earlier engines had bracket mounting holes with 3/8-16-2B threads. Later cylinder heads had bracket mounting holes with 1/2-13-2B threads.(1) If a cylinder head of the earlier type is replacing a later cylinder head, the replacement cylinder head will have 3/8"-16-2B threads in the mounting holes. Install the bracket with S1594 Bolts and 5M2894 Washers.(2) If a cylinder head of the later type is replacing an earlier cylinder head, the holes in the lifting eye bracket, and other brackets, must be enlarged to 13.0 mm Ø (0.53" Ø). Use 6H1717 Bolts and 5P8245 Washers to install the bracket on the replacement cylinder head.3208 Turbocharged Engines
(1) If the cylinder head is to be used on the left side of the engine, install a 9L7657 Cup Plug at location (A). If the cylinder head is to be used on the right side of the engine, install a 9L7657 Cup Plug at location (B). On all cylinder heads, install a 7H3181 Hex Countersunk Head Plug at location (C). Install 5M6213 Plugs at locations (D) as necessary. Due to the different size holes in earlier and later cylinder heads, install either a 2B858 or a 5M6214 Plug in the opening at (E).(2) Put the cylinder head in position on the engine. Put engine oil on the threads of the cylinder head bolts and install the bolts in their correct positions. Tighten the bolts in sequence and to the torque shown in the Service Manual.3204 Turbocharged Engines
Because two different water lines groups have been used on these engines, it may be necessary to obtain some additional parts. See Step 1 and the illustrations for the parts needed. (1) Install a 7H3171 Hex Countersunk Head Plug at location (A), a 9L7657 Cup Plug at location (B), and 5M6213 Plugs at locations (C) as necessary.(2) New vent line parts (not part of the cylinder head group) will be needed if the threaded hole at location (D) is a different size than the hole in the former cylinder head. See the illustrations for the parts needed to make a new vent line.(3) Put the cylinder head in position on the engine. Put engine oil on the threads of the cylinder head bolts, and install the bolts in their correct position. Tighten the bolts in sequence and to the torque shown in the Service Manual. Connect the vent lines as shown. Cylinder heads for 3204 Turbocharged Engines were originally built with a single valve spring per valve. This replacement cylinder head contains two valve springs per valve (double valve springs). However, this cylinder head group (with double valve springs) is directly adaptable for use on 3204 Turbocharged Engines. No changes or modifications are required. For replacement valve spring parts for this cylinder head group,
Caterpillar parts catalog:
Parts core Caterpillar catalog:
4I1539
CORE
303, 303.5, 303.5C, 303.5E, 303C CR, 304, 304.5, 304C CR, 304E, 305, 305.5, 305.5E, 305C CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR,...
303, 303.5, 303.5C, 303.5E, 303C CR, 304, 304.5, 304C CR, 304E, 305, 305.5, 305.5E, 305C CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR,...
303, 303.5, 303.5C, 303.5E, 303C CR, 304, 304.5, 304C CR, 304E, 305, 305.5, 305.5E, 305C CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311B, 311C, 311D LRR,...
3387728
CORE AS-FUEL COOLER
2384C, 2484C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320D GC, 320D L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 559C, 5...
2384C, 2484C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320D GC, 320D L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 559C, 5...
3507493
CORE AS-RADIATOR
316E L, 318E L
316E L, 318E L
3507494
CORE AS-OIL COOLER
316E L, 318E L
316E L, 318E L
3639456
CORE AS-HEATER
312E, 312E L, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 34...
312E, 312E L, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 34...
3507494
CORE AS-OIL COOLER
316E L, 318E L
316E L, 318E L
3507493
CORE AS-RADIATOR
316E L, 318E L
316E L, 318E L
3387728
CORE AS-FUEL COOLER
2384C, 2484C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320D GC, 320D L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 559C, 5...
2384C, 2484C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320D GC, 320D L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 559C, 5...
235B, 572R, D7R
3057606
CORE AS-OIL COOLER
314D CR, 314D LCR
314D CR, 314D LCR
3057605
CORE AS-RADIATOR
314D CR, 314D LCR
314D CR, 314D LCR
3781259
CORE AS-OIL COOLER
305.5E, 305E
305.5E, 305E
3803496
CORE AS-HYDRAULIC OIL COOLER
303.5E, 304E
303.5E, 304E
3527782
CORE AS-AFTERCOOLER
312E, 312E L
312E, 312E L
3527781
CORE AS-OIL COOLER
312E, 312E L
312E, 312E L
3527780
CORE AS-RADIATOR
312E, 312E L
312E, 312E L
3639456
CORE AS-HEATER
312E, 312E L, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 34...
312E, 312E L, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 349E, 349E L, 34...