CORE AS-OIL COOLER 3535551 - Caterpillar

Illustration 16 g02140683
Install Tooling (A) into barrel assembly (8).
Illustration 17 g02126683
Use Tooling (C) in order to extract the rotating group (10), cover (11), O-ring seal (12), and the shims (13).
Illustration 18 g02140734
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Remove Tooling (A) from barrel assembly (8). Remove barrel assembly (8) from the pistons (15).
Illustration 19 g02141875
Remove spring (16) from barrel assembly (8).
Illustration 20 g02141632
Install shim (17) that was determined in Step 17. Install spring (16) into barrel (8).
Illustration 21 g02140734
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install barrel assembly (8) onto the pistons (15). Install Tooling (B) into barrel assembly (8).
Illustration 22 g02142077
Raise the temperature of housing (3) to 80 °C (176 °F). Lower the temperature of rotating group (10).
Install the rotating group into housing (3).
Illustration 23 g02142402
Install shims (13) that were determined in Step 4. Install O-ring seal (12) into the housing.
Illustration 24 g02142405
Install cover (11). Use Tooling (B) in order to install retaining ring (9).
Illustration 25 g02140683
Remove Tooling (A) from barrel (8).
Illustration 26 g02142973
Install O-ring seal (6) onto housing (3). Lubricate the face of barrel (8) with the oil that is being used.
Illustration 27 g02143104
Use Tooling (J) in order to adhere plate (7) onto head (5).
Illustration 28 g02126571
Position head (5) onto housing (3).
Install bolts (4).
Illustration 29 g02126548
Install elbow (2) and sensor (1) onto housing (3). End By:
Install the piston motor.