3582050 CORE AS-OIL COOLER Caterpillar parts
980H, 980M, 982M
Rating:
Alternative (cross code) number:
CA3582050
358-2050
3582050
CA3582050
358-2050
3582050
Weight: 71 pounds 32 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
DoraKvi Hydraulic Oil Cooler 358-2050 3582050 Compatible with CAT 988G 980H 980L Wheel Loader
DoraKvi ???? Part Name :Hydraulic Oil Cooler || ???? Part Number :358-2050 3582050 || ???? Application : Compatible with CAT 988G 980H 980L Wheel Loader || ✅ Accurate ✅- In Order To Avoid Unnecessary Returnplease. Please follow the old part number and machine model to find the right product, if you are not sure, please contact us, we are more than happy to provide services. || ???? Reliable performance ????-DoraKvi- our products have been carefully designed and tested, with high reliability and stability, can maintain good working condition for a long time.
DoraKvi ???? Part Name :Hydraulic Oil Cooler || ???? Part Number :358-2050 3582050 || ???? Application : Compatible with CAT 988G 980H 980L Wheel Loader || ✅ Accurate ✅- In Order To Avoid Unnecessary Returnplease. Please follow the old part number and machine model to find the right product, if you are not sure, please contact us, we are more than happy to provide services. || ???? Reliable performance ????-DoraKvi- our products have been carefully designed and tested, with high reliability and stability, can maintain good working condition for a long time.
Tenlioshun Hydraulic Oil Cooler 204-2640 204-2642 132-3965 358-2050 379-9669 379-9670 511-7597 Radiators Compatible with Caterpillar 988G 980H 980L Wheel Loader
Tenlioshun Part Name: Hydraulic Oil Cooler || Part number: 204-2640 204-2642 132-3965 20 358-2050 379-9669 379-9670 511-7597 2042640 2042642 1323965 3582050 3799669 3799670 5117597 || Compatible with Caterpillar 988G 980H 980L Wheel Loader || Warranty: 6 Months || Note: Avoid unnecessary returns. Before purchase, please carefully check whether the product model you want to buy matches us. If you don't know, please contact us.
Tenlioshun Part Name: Hydraulic Oil Cooler || Part number: 204-2640 204-2642 132-3965 20 358-2050 379-9669 379-9670 511-7597 2042640 2042642 1323965 3582050 3799669 3799670 5117597 || Compatible with Caterpillar 988G 980H 980L Wheel Loader || Warranty: 6 Months || Note: Avoid unnecessary returns. Before purchase, please carefully check whether the product model you want to buy matches us. If you don't know, please contact us.
NEW Oil Cooler 358-2050 3582050 DJCXYSM Compatible with CAT WHEEL LOADER 982M 980M 980H
DJCXYSM Product Name:Oil Cooler || Part Number:358-2050 3582050 || Application: Compatible with CAT WHEEL LOADER 982M 980M 980H || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || Tips: If you cannot find the product part number you need, please contact us. We will provide you with a quotation and create a link as soon as possible.
DJCXYSM Product Name:Oil Cooler || Part Number:358-2050 3582050 || Application: Compatible with CAT WHEEL LOADER 982M 980M 980H || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || Tips: If you cannot find the product part number you need, please contact us. We will provide you with a quotation and create a link as soon as possible.
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 388-1289 Capping Kit 1
Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Turn the fuel supply to the OFF position.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g02876777
Disconnect harness assembly (3) from fuel temperature sensor (2).
Use a deep socket in order to remove fuel temperature sensor (2) from fuel filter base (1).
Use Tooling (A) to plug the open port of the fuel injection pump.
Remove sealing washer (4) (not shown) from fuel temperature sensor (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are free from wear and damage. Replace any components that are worn or damaged.
Illustration 2 g02876777
Install new sealing washer (4) (not shown) onto fuel temperature sensor (2).
Remove the plug from the fuel filter base (1).
Install fuel temperature sensor (2) to the fuel filter base. Use a deep socket to tighten the fuel temperature sensor to a torque of 22 N m (195 lb in).
Connect harness assembly (3) to fuel temperature sensor (2).
Turn the fuel supply to the ON position.
Turn the battery disconnect switch to the ON position.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 388-1289 Capping Kit 1
Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Turn the fuel supply to the OFF position.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g02876777
Disconnect harness assembly (3) from fuel temperature sensor (2).
Use a deep socket in order to remove fuel temperature sensor (2) from fuel filter base (1).
Use Tooling (A) to plug the open port of the fuel injection pump.
Remove sealing washer (4) (not shown) from fuel temperature sensor (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that all components are free from wear and damage. Replace any components that are worn or damaged.
Illustration 2 g02876777
Install new sealing washer (4) (not shown) onto fuel temperature sensor (2).
Remove the plug from the fuel filter base (1).
Install fuel temperature sensor (2) to the fuel filter base. Use a deep socket to tighten the fuel temperature sensor to a torque of 22 N m (195 lb in).
Connect harness assembly (3) to fuel temperature sensor (2).
Turn the fuel supply to the ON position.
Turn the battery disconnect switch to the ON position.
Caterpillar parts catalog:
Parts core Caterpillar catalog:
24M, 3406B, 3406C, 3406E, 3456, 385B, 5090B, 583T, 587T, 651B, 657B, 770, 772, 824C, 824G, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834G, 834H, 836G, 836H, 980G, 980G II, 980H, 986H, 988G, 988H, A...
844K, 980M, 982M, 986H, 990K, C32, D7E, D7E LGP
3406E, 651B, 657B, 824C, 824G, 824G II, 824H, 825G II, 825H, 826G II, 826H, 980G, 980G II, 980H, C-15, R2900G, R3000H
3298587
CORE AS-CONDENSER
950K, 962K, 966F II, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 980H, 980K, 980K HLG, 980M, 982M, 988K
950K, 962K, 966F II, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 980H, 980K, 980K HLG, 980M, 982M, 988K
4175127
CORE AS-RADIATOR
966K, 972K, 980H
966K, 972K, 980H
3582029
CORE AS-AFTERCOOLER
980H, 986H
980H, 986H
3688654
CORE AS-FUEL COOLER
966M, 966M XE, 972M, 972M XE, 980M, 982M
966M, 966M XE, 972M, 972M XE, 980M, 982M
3866026
CORE AS-AFTERCOOLER
980M, 982M
980M, 982M
4255954
CORE AS-RADIATOR
980M, 982M
980M, 982M
834H, 836H, 988H
950H, 962H
3507490
CORE AS-OIL COOLER
950H, 962H
950H, 962H
2508299
CORE AS-OIL COOLER
994F, 994H
994F, 994H
2508298
CORE AS-OIL COOLER
994F, 994H
994F, 994H
3582030
CORE AS-OIL COOLER
980H, 980M, 982M
980H, 980M, 982M
824C, 824H, 825H, 826H, 980H
3342578
CORE AS-CONDENSER
834K, 950K, 962K, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 980H, 980K, 980M, 982M, 986H, 988K
834K, 950K, 962K, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 980H, 980K, 980M, 982M, 986H, 988K
4175124
CORE AS-RADIATOR
966K, 972K, 980H
966K, 972K, 980H