CORE AS-OIL COOLER 3742041 - Caterpillar

Introduction
This Special Instruction covers the installation procedure for the 225-4515 Auxiliary Pump Drive Gp on the models listed above.Safety Section
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Personal injury or death can result from sudden work tool movement.Sudden movement of the work tool can cause injury to persons near the work tool.To prevent injury or death, make sure that the area around the work tool is clear of personnel and obstructions before operating the work tool.
Personal injury or death can result from improperly checking for a leak.Always use a board or cardboard when checking for a leak. Escaping air or fluid under pressure, even a pin-hole size leak, can penetrate body tissue causing serious injury, and possible death.If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Illustration 1 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
225-4515 Auxiliary Pump Drive Gp 01
Consists of
234-4620 Auxiliary Pump Drive Gp    
Item     Qty     Part No.     Description    
(1)     1     295-9441     Auxiliary Pump Drive Gp    
(2)     8     108-1781     Bolt    
Illustration 2 g03778118
Overview of the 225-4515 Auxiliary Pump Drive Gp
Table 2
Standard Removal    
Item     Qty     Part No.     Description    
(A)     8     8T-9080     Bolt    
(B)     1     225-4516     Plate    
Illustration 3 g03778117
Standard removal parts for the 225-4515 Auxiliary Pump Drive Gp (A) 8T-9080 Bolt (B) 225-4516 Plate Installation Procedure
Illustration 4 g03778696
(1) 295-9441 Auxiliary Pump Drive Gp (2) 108-1781 Bolt
Install auxiliary pump drive gp as shown.
Tighten all fittings and hardware to standard torque.