3749700 CORE AS-OIL COOLER Caterpillar parts
D9T
Rating:
Alternative (cross code) number:
CA3749700
374-9700
3749700
CA3749700
374-9700
3749700
Weight: 75 pounds 34 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
New radiator 334-3321 3343321 Compatible with CAT Carter D9T C19 bulldozer
Starhycfa Product Name:Radiator || Part Number:374-9700 3749700 || APPlication:Compatible with CAT Carter D9T C19 bulldozer || Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
Starhycfa Product Name:Radiator || Part Number:374-9700 3749700 || APPlication:Compatible with CAT Carter D9T C19 bulldozer || Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
New radiator 334-3321 3343321 Compatible with CAT Carter D9T C19 bulldozer
Starhycfa Product Name:Radiator || Part Number:374-9700 3749700 || APPlication:Compatible with CAT Carter D9T C19 bulldozer || Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
Starhycfa Product Name:Radiator || Part Number:374-9700 3749700 || APPlication:Compatible with CAT Carter D9T C19 bulldozer || Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
New radiator 374-9700 3749700 Compatible with CAT Carter D9T C18 bulldozer
Starhycfa Product Name:Radiator || Part Number:334-3321 3343321 || APPlication:Compatible with CAT Carter D9T C18 bulldozer || Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
Starhycfa Product Name:Radiator || Part Number:334-3321 3343321 || APPlication:Compatible with CAT Carter D9T C18 bulldozer || Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 3749700:
Information:
2. Remove the wiring harness (3) for glow plugs.3. Remove lifting eyebolt (1), and move the junction box (2) clear of cylinder head. Install the eyebolt in cylinder head. 4. Remove air inlet line (11) for air compressor.5. Remove the sending unit (10) for water temperature from the cylinder head.6. Remove outlet line for water (9) for the air compressor.7. Remove bypass line for water (7) for water pump.8. Remove vent line (6) for water pump.9. Remove water outlet elbow (4) for cylinder head.10. Remove breather pipe (8).11. Remove the bolts (5) that fasten cylinder head to cylinder block.12. Fasten a hoist and remove the cylinder head. Weight of cylinder head is 200 lb. (91 kg).Install Cylinder Head
1. Install a new and dry cylinder head gasket.2. Fasten a hoist and put the cylinder head assembly into position on cylinder block. Install the push rods, and put the rocker shaft and arms in position on cylinder head. 3. Put 9M3710 Anti-Seize Compound on threads of fastening bolts for cylinder head. Install the bolts and washers. Tighten the bolts in the following Step sequence: 1 Tighten numbered bolts in number order to 115 lb.ft. (15,9 mkg).2 Tighten numbered bolts in number order to 175 5 lb.ft. (24,2 0,7 mkg).3 Tighten all numbered bolts in number order (hand torque only) to 175 5 lb.ft. (24,2 0,7 mkg).4 Tighten all lettered bolts in alphabetical order to 22 lb.ft. (3,0 mkg).5 Tighten all lettered bolts in alphabetical order to 32 5 lb.ft. (4,4 0,7 mkg).6 Tighten all lettered bolts in alphabetical order (hand torque only) to 32 5 lb.ft. (4,4 0,7 mkg).4. Make an adjustment to the rocker arms so inlet valve clearance will be .015 in. (0,38 mm) and exhaust valve clearance will be .025 in. (0,64 mm).5. Install the breather pipe.6. Install water outlet elbow on cylinder head.7. Install vent line and bypass line for water for the water pump.8. Install outlet line for water for air compressor.9. Install sending unit for water temperature in cylinder head. Install the air inlet line for air compressor.10. Remove eyebolt and put junction box in position. Install eyebolt. Install the wiring harness.11. Install elbow and support assembly for the air cleaner. Fill the cooling system.end by: a) install rocker shaft, arms and push rodsb) install exhaust manifold
1. Install a new and dry cylinder head gasket.2. Fasten a hoist and put the cylinder head assembly into position on cylinder block. Install the push rods, and put the rocker shaft and arms in position on cylinder head. 3. Put 9M3710 Anti-Seize Compound on threads of fastening bolts for cylinder head. Install the bolts and washers. Tighten the bolts in the following Step sequence: 1 Tighten numbered bolts in number order to 115 lb.ft. (15,9 mkg).2 Tighten numbered bolts in number order to 175 5 lb.ft. (24,2 0,7 mkg).3 Tighten all numbered bolts in number order (hand torque only) to 175 5 lb.ft. (24,2 0,7 mkg).4 Tighten all lettered bolts in alphabetical order to 22 lb.ft. (3,0 mkg).5 Tighten all lettered bolts in alphabetical order to 32 5 lb.ft. (4,4 0,7 mkg).6 Tighten all lettered bolts in alphabetical order (hand torque only) to 32 5 lb.ft. (4,4 0,7 mkg).4. Make an adjustment to the rocker arms so inlet valve clearance will be .015 in. (0,38 mm) and exhaust valve clearance will be .025 in. (0,64 mm).5. Install the breather pipe.6. Install water outlet elbow on cylinder head.7. Install vent line and bypass line for water for the water pump.8. Install outlet line for water for air compressor.9. Install sending unit for water temperature in cylinder head. Install the air inlet line for air compressor.10. Remove eyebolt and put junction box in position. Install eyebolt. Install the wiring harness.11. Install elbow and support assembly for the air cleaner. Fill the cooling system.end by: a) install rocker shaft, arms and push rodsb) install exhaust manifold
Caterpillar parts catalog:
Parts core Caterpillar catalog:
24H, 3412, 3412C, 3412D, 3412E, 374F L, 385C, 390F L, 5110B, 651E, 657E, 657G, 770G, 770G OEM, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC,...
1807180
CORE-VALVE
120M, 12M, 16M, 24M, 5130B, 5230B, 583T, 587T, 613G, 621G, 623G, 627G, 631G, 637G, 651E, 657E, 657G, 725C, 770, 772, 773F, 775F, 777F, 784C, 785C, 789C, 793C, 793D, 797B, 854K, 924K, 930K, 938K, 953D,...
120M, 12M, 16M, 24M, 5130B, 5230B, 583T, 587T, 613G, 621G, 623G, 627G, 631G, 637G, 651E, 657E, 657G, 725C, 770, 772, 773F, 775F, 777F, 784C, 785C, 789C, 793C, 793D, 797B, 854K, 924K, 930K, 938K, 953D,...
834K, 836K, 988K, D8L, D9N, D9R, D9T
2318103
CORE AS
D9T
D9T
3343321
CORE AS-HYDRAULIC OIL COOLER
D8T, D9T
D8T, D9T
2318103
CORE AS
D9T
D9T
D10N, D10R, D10T, D9T
1990949
CORE AS-HYDRAULIC OIL COOLER
814F, 815F, 816F
814F, 815F, 816F
1976775
CORE AS-CONDENSER
814F, 814F II, 815F, 815F II, 824C, 824G II, 824H, 825G II, 825H
814F, 814F II, 815F, 815F II, 824C, 824G II, 824H, 825G II, 825H
1991025
CORE AS-HYDRAULIC OIL COOLER
824G II, 825G II, 826G II, 826H
824G II, 825G II, 826G II, 826H
1903832
CORE GP-OIL COOLER
D10N, D10R, D10T, D11R, D11T
D10N, D10R, D10T, D11R, D11T
D10N, D10R, D10T
D10N, D10R, D10T