CORE AS-AFTERCOOLER 3876052 - Caterpillar

Illustration 1 g00763679
(1) Apply 9S-3263 Thread Lock Compound to the bolt threads at assembly. (2) Apply 9S-3263 Thread Lock Compound to the bolt threads at assembly. (3) Torque for the plug ... 100 15 N m (74 11 lb ft) (4) Torque for the two plugs ... 90 15 N m (66 11 lb ft) (5) Rotate the lobe of the weight downward. Orient the "T" upward on the splined shaft. The total shaft end play should be .50 mm (0.02 inch) to1.35 mm (0.05 inch). The assembled housing should be capable of holding 70 kPa (10 psi) static air pressure and 35 kPa (5 psi) static vacuum.The weight of the 180-7333 Shot must total 10.83 kg (23.88 lb).Note: In order to fill the reservoir, the position of the fill/drain plug must be located at the top of the rotation.Note: Flush the eccentric weight housing after assembly. A level of "ISO 18/15" or lower is required.