CORE ASSEM. 3N2671 - Caterpillar

3N2671 CORE ASSEM. Caterpillar parts 1674

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3N2671
3N-2671
3N2671

Weight: 43 pounds 19 kg.

Buy CORE ASSEM. 3N2671 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 3N2671:

TRUCK ENGINE 1674 Caterpillar

Number on catalog scheme: 4

Caterpillar 3N2671 Parts scheme CORE ASSEM.

For full view, you need register

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02449496
Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1) from crankshaft position sensor (3).
Remove bolt (4) from the cylinder block.
Carefully remove crankshaft position sensor (3) from the cylinder block. Note: Do not use a lever to remove the crankshaft position sensor from the cylinder block.
Remove O-ring seal (5) from crankshaft position sensor (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02449496
Install a new O-ring seal (5) to crankshaft position sensor (3). Note: Do not lubricate the O-ring seal.
Install crankshaft position sensor (3) to the cylinder block. Install bolt (4) and tighten the bolt to a torque of 14 N m (124 lb in).
Connect harness assembly (1) to crankshaft position sensor (3). Slide locking tab (2) into the locked position.