CORE AS-HYDRAULIC OIL COOLER 4614741 - Caterpillar

Illustration 1 g00575819
(1) Lock pin
(A) ONE-WAY FLOW position
(B) LOCKED position
(C) TWO-WAY FLOW position The pedal allows modulation of the implement speed. To cause the implement to move faster, push down on the pedal more.The pedal has three positions. Position (A) allows hydraulic oil to flow in one direction (hydraulic hammer). Position (C) allows hydraulic oil to flow in both directions (hydraulic shear). Use LOCKED position (B) when the implement does not need to be used.When the pedal is in ONE-WAY FLOW position (A), the pedal can be depressed only in the forward direction. An example of a work tool that requires one-way flow is a hydraulic hammer.When the pedal is in TWO-WAY FLOW position (C), the pedal can be depressed forward and backward. An example of a work tool that requires two-way flow is a shear.Insert lock pin (1) into LOCKED position (B) when the implement is not being used. This will prevent any unexpected operation of the implement.
Illustration 2 g00291805
(1) Lock pin
(2) Pin
(3) Notch Note: To prevent lock pin (1) from being pulled out, insert pin (2) through notch (3) and turn lock pin (1) counterclockwise by 1/4 turn.