CORE-RADIATOR 4836586 - Caterpillar

Removal Procedure
Start By:
Remove the cab. Refer to Disassembly and Assembly, "Cab - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all hose assemblies and on all harness assemblies for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.Note: Each transmission modulating valve has the same removal procedure.
Illustration 1 g01325163
Disconnect harness assembly (1) .
Disconnect hose assembly (3) .
Remove bolts (2) and remove transmission modulating valve (4) .