4I7376 CORE AS Caterpillar parts
311, 312
Rating:
Alternative (cross code) number:
CA4I7376
4I-7376
4I7376
CA4I7376
4I-7376
4I7376
Weight: 35 pounds 15 kg.
Information:
CORE DEPTH
48.5
mm
CORE HEIGHT
570
mm
CORE WIDTH
622
mm
HEIGHT BOTTOM TANK
68
mm
HEIGHT OF TOP TANK
68
mm
NUMBER OF TUBE ROWS
0
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
4I7376 Radiator Fits for CAT E312 311 Engine 3046 Replace parts
GENERIC Part Name:Radiator || Part Number:4I7376 || Application: Fits for CAT E312 311 Engine 3046
GENERIC Part Name:Radiator || Part Number:4I7376 || Application: Fits for CAT E312 311 Engine 3046
New Radiator 4I7376 Fits for CAT E312 311 Engine 3046
XYohykai ◆TIPS◆: There is a wide range of products, if you can't find the part number you need, please contact us in time, we will provide details and quotes in the first time. || ◆Part Name◆:Radiator || ◆Part Number◆:4I7376 || ◆Application◆: Fits for CAT E312 311 Engine 3046 ◆Condition◆:New ◆This package includes◆:Radiator *1 || ◆Notice◆-Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us.
XYohykai ◆TIPS◆: There is a wide range of products, if you can't find the part number you need, please contact us in time, we will provide details and quotes in the first time. || ◆Part Name◆:Radiator || ◆Part Number◆:4I7376 || ◆Application◆: Fits for CAT E312 311 Engine 3046 ◆Condition◆:New ◆This package includes◆:Radiator *1 || ◆Notice◆-Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us.
New Radiator 4I7376 For Caterpillar E312 311 Engine 3046
oiasdfhjdg Product Name:Radiator || Part Number:4I7376 || APPlication:Compatible with Caterpillar E312 311 Engine 3046 || 1.Please carefully compare the OE numbers before purchasing the product to match your original parts and avoid wasting your valuable time. || 2.Please ensure to provide us with the correct, accurate, and detailed delivery address and contact information
oiasdfhjdg Product Name:Radiator || Part Number:4I7376 || APPlication:Compatible with Caterpillar E312 311 Engine 3046 || 1.Please carefully compare the OE numbers before purchasing the product to match your original parts and avoid wasting your valuable time. || 2.Please ensure to provide us with the correct, accurate, and detailed delivery address and contact information
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
The two cylinder, the three cylinder and the four cylinder engines have different crankcase breathers. The removal procedure is similar for all models.
Illustration 1 g01307795
Typical example
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (1) and remove the assembly of cover (2), spring (3) and diaphragm (4). Note the orientation of cover (2).
Remove spring (3) and diaphragm (4) from cover (2).
If necessary, follow Steps 3.a through 3.c in order to remove the gauze for the breather.
Remove valve mechanism cover (7). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Remove screws (8) and carefully remove plate (9).
Remove gauze (6) from valve mechanism cover (7). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 594 -
B 247-5377 Torque Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Make sure that the components of the breather assembly are installed correctly. Engine damage may occur if the breather assembly is not working properly.
The two cylinder, the three cylinder and the four cylinder engines have different crankcase breathers. The installation procedure is similar for all models.
Illustration 2 g01307795
Typical example
Clean all parts and inspect all parts. Replace any parts that are worn or damaged. Ensure that the cavity for the breather in the valve mechanism cover is clean. Ensure that vent hole (5) and the vent hole in cover (2) are free from restriction.
If necessary, follow Steps 2.a through 2.e in order to install the gauze for the breather.
Install gauze (6) to valve mechanism cover (7).
Apply a bead of Tooling (A) to the mating surface of the plate on valve mechanism cover (7).
Position plate (9) on valve mechanism cover (7) and install screws (8).
Tighten screws (8) to a torque of 1.5 N m (13 lb in).
Install valve mechanism cover (7). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install diaphragm (4) and spring (3) to cover (2).
Position the assembly of cover (2), spring (3) and diaphragm (4) onto valve mechanism cover (7). Note: Ensure the correct orientation of the cover.
Install bolts (1). Use Tooling (B) in order to tighten bolts to a torque of 3 N m (27 lb in).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
The two cylinder, the three cylinder and the four cylinder engines have different crankcase breathers. The removal procedure is similar for all models.
Illustration 1 g01307795
Typical example
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (1) and remove the assembly of cover (2), spring (3) and diaphragm (4). Note the orientation of cover (2).
Remove spring (3) and diaphragm (4) from cover (2).
If necessary, follow Steps 3.a through 3.c in order to remove the gauze for the breather.
Remove valve mechanism cover (7). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Remove screws (8) and carefully remove plate (9).
Remove gauze (6) from valve mechanism cover (7). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 594 -
B 247-5377 Torque Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Make sure that the components of the breather assembly are installed correctly. Engine damage may occur if the breather assembly is not working properly.
The two cylinder, the three cylinder and the four cylinder engines have different crankcase breathers. The installation procedure is similar for all models.
Illustration 2 g01307795
Typical example
Clean all parts and inspect all parts. Replace any parts that are worn or damaged. Ensure that the cavity for the breather in the valve mechanism cover is clean. Ensure that vent hole (5) and the vent hole in cover (2) are free from restriction.
If necessary, follow Steps 2.a through 2.e in order to install the gauze for the breather.
Install gauze (6) to valve mechanism cover (7).
Apply a bead of Tooling (A) to the mating surface of the plate on valve mechanism cover (7).
Position plate (9) on valve mechanism cover (7) and install screws (8).
Tighten screws (8) to a torque of 1.5 N m (13 lb in).
Install valve mechanism cover (7). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install diaphragm (4) and spring (3) to cover (2).
Position the assembly of cover (2), spring (3) and diaphragm (4) onto valve mechanism cover (7). Note: Ensure the correct orientation of the cover.
Install bolts (1). Use Tooling (B) in order to tighten bolts to a torque of 3 N m (27 lb in).
Caterpillar parts catalog:
Parts core Caterpillar catalog:
311, 312
307, E70B
307, E70B
1859200
CORE
307
307
311B, 312B
5I3556
CORE ASSEM.
311B, 320 L, 320B, 325, 325 LN, 325B, 350, 375
311B, 320 L, 320B, 325, 325 LN, 325B, 350, 375
1059507
CORE ASSEM.
311B, 320B, 325, 325B
311B, 320B, 325, 325B
1397187
CORE AS
307B
307B
1397188
CORE AS
307B
307B
5I3555
CORE AS (EVAPORATOR)
320 L, 325, 325 LN, 350, 375
320 L, 325, 325 LN, 350, 375
1099288
CORE AS
315
315
1099287
CORE AS
315
315
311, 312