4W8886 CORE AS-RADIATOR Caterpillar parts
508
Rating:
Alternative (cross code) number:
CA4W8886
4W-8886
4W8886
CA4W8886
4W-8886
4W8886
Weight: 13 pounds 6 kg.
Information:
CORE DEPTH
0
mm
CORE WIDTH
0
mm
FIN HEIGHT
681
mm
FINS PER 25.4 MM
0
MODULE HEIGHT
710
mm
NUMBER OF ROWS
0
NUMBER OF TUBES
0
WHEEL SKIDDER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Radiator Core fits Caterpillar 4W-8886
Parts ASAP Replaces Caterpillar OEM Number(s) 4W-8886 || Core Type: Folded Core || Core Length: 26-1/2" || Overall Length: 27-7/8"
Parts ASAP Replaces Caterpillar OEM Number(s) 4W-8886 || Core Type: Folded Core || Core Length: 26-1/2" || Overall Length: 27-7/8"
Replacement Parts For Auto Moto Truck Tractor OEM For Radiator Core fits Caterpillar 4W-8886 Index-GT988-20275
Generic High Quality: OEM parts ensure dependable operation for your automobile, motorcycle, truck, or tractor. || Compatibility: Our replacements precisely match original parts, guaranteeing seamless compatibility and efficiency. || Durability: We offer parts that have undergone rigorous durability testing, providing long-lasting functionality for your vehicle. || Variety: Explore our assortment for a wide range of replacements catering to different makes and models of automobiles, motorcycles, trucks, and tractors. || Exceptional Service: Our team is ready to provide you with professional guidance and assistance in selecting the right parts for your vehicle.
Generic High Quality: OEM parts ensure dependable operation for your automobile, motorcycle, truck, or tractor. || Compatibility: Our replacements precisely match original parts, guaranteeing seamless compatibility and efficiency. || Durability: We offer parts that have undergone rigorous durability testing, providing long-lasting functionality for your vehicle. || Variety: Explore our assortment for a wide range of replacements catering to different makes and models of automobiles, motorcycles, trucks, and tractors. || Exceptional Service: Our team is ready to provide you with professional guidance and assistance in selecting the right parts for your vehicle.
Number on catalog scheme:
3
For full view, you need register
Compatible equipment models: 4W8886:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-5096 Dial Indicator Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the crankshaft main bearing tabs engage with the grooves in the block and the crankshaft main bearing cap.
Illustration 1 g01022781
Place the upper halves of crankshaft main bearings (3) in the cylinder block. Place the lower halves of crankshaft main bearings (3) in the crankshaft main bearing caps.
Fasten a suitable lifting device to the crankshaft and place the crankshaft in the cylinder block. The weight of the crankshaft is approximately 129 kg (285 lb).
Install crankshaft thrust bearings (4) .
Illustration 2 g01022767
Install crankshaft main bearing caps (2) with the part numbers toward the right hand side of the cylinder block. Ensure that crankshaft main bearing caps (2) have numbers 1 through 7. The numbers should start at the front of the engine. Place clean engine oil or Molylube on the bolt threads and the washers. Install bolts (1) . Tighten the bolts to a torque of 95 5 N m (70 4 lb ft).
Place an index mark on each bolt head. Turn the bolts for an additional 90 5 degrees (1/4 turn).
Check the end play of the crankshaft with Tooling (A) . The end play must be 0.10 mm (0.004 inch) to 0.50 mm (0.020 inch).End By:
Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".
Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Remove and Install".
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-5096 Dial Indicator Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the crankshaft main bearing tabs engage with the grooves in the block and the crankshaft main bearing cap.
Illustration 1 g01022781
Place the upper halves of crankshaft main bearings (3) in the cylinder block. Place the lower halves of crankshaft main bearings (3) in the crankshaft main bearing caps.
Fasten a suitable lifting device to the crankshaft and place the crankshaft in the cylinder block. The weight of the crankshaft is approximately 129 kg (285 lb).
Install crankshaft thrust bearings (4) .
Illustration 2 g01022767
Install crankshaft main bearing caps (2) with the part numbers toward the right hand side of the cylinder block. Ensure that crankshaft main bearing caps (2) have numbers 1 through 7. The numbers should start at the front of the engine. Place clean engine oil or Molylube on the bolt threads and the washers. Install bolts (1) . Tighten the bolts to a torque of 95 5 N m (70 4 lb ft).
Place an index mark on each bolt head. Turn the bolts for an additional 90 5 degrees (1/4 turn).
Check the end play of the crankshaft with Tooling (A) . The end play must be 0.10 mm (0.004 inch) to 0.50 mm (0.020 inch).End By:
Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".
Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Remove and Install".
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Caterpillar parts catalog:
Parts core Caterpillar catalog:
120, 120G, 12E, 12F, 140, 14E, 2470C, 2570C, 2670C, 2864C, 414E, 416, 416B, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 426, 426B, 426C, 428, 428B, 428D, 428E, 430D, 430E, 430F, 432D, 432E, ...
8N6536
CORE AS-OIL COOLER
508, 926A, D3B, D4H, D4H XL, D4HTSK II, D4HTSK III, IT28
508, 926A, D3B, D4H, D4H XL, D4HTSK II, D4HTSK III, IT28
4331671
CORE AS-RADIATOR
320D2
320D2
320D2, 320D2 GC, 320D2 L, 323D2 L
320D GC, 320D L, 323D L
320E LRR, 320E RR, 336F L, 374F L, 390F L
5Q3450
CORE AS.
320 L
320 L
5Q3447
CORE AS.
320 L
320 L
4625183
CORE TUBE
FB221
FB221
1180259
CORE AS
322 FM L
322 FM L
1180258
CORE AS
322 FM L
322 FM L