CORE AS-HEATER 5208326 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     -     Guide Bolt
5/8 - 18 NF by 7 inch     1    
B     4C-5593     Thread Lubricant     -    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02160891
Remove bolts (1) and remove guard (2) .
Release the tension on the belt tensioner in order to position belt (3) out of the way.
Remove bolts (4) and remove pulley (5) .
Illustration 2 g02160924
Remove one bolt (6) and install Tooling (A) .
Remove remaining bolts (6) . Use two people in order to remove vibration damper assembly (7) . The weight of vibration damper assembly (2) is approximately 46 kg (100 lb).
Illustration 3 g02161096
Remove bolts (10) and remove spacer (9) .
Separate damper (7) from adapter (8) .Installation Procedure
Install vibration damper (7) in the reverse order.
Apply Tooling (B) to bolts (6) .
Tighten bolts (6) to a torque of 270 40 N m (200 30 lb ft).