CORE AS 5277116 - Caterpillar

Illustration 7 g00984596
Remove bearing (8) from plate (7) .
Illustration 8 g00984597
Remove bar assembly (5) from the machine. The weight of the bar assembly is approximately 671 kg (1480 lb).
Illustration 9 g00984599
Remove bearing (9) from frame (10) .Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-7640     Stands     2    
8S-7631 Tubes     2    
B     8S-7640     Stand     1    
8S-7631 Tube     1    
8S-8048 Saddle     1    
Illustration 10 g00984599
Install bearing (9) into frame (10) .
Illustration 11 g00984597
Attach a suitable lifting device and suitable lifting slings to bar assembly (5). Install the bar assembly. The weight of the bar assembly is approximately 671 kg (1480 lb).
Illustration 12 g00984596
Install bearing (8) in plate (7) .
Illustration 13 g00984595
Use two persons and install plate (7), the shims, and seven bolts (6) on bar (5). The weight of the plate is approximately 39 kg (87 lb).
Illustration 14 g00984594
Illustration 15 g00984593
Attach a suitable lifting device and a suitable lifting chain to the frame, as shown. Raise the machine. Remove Tooling (B) and install Tooling (A) .
Illustration 16 g00984592
Install the cable straps that connect wiring harness assembly (3) and wiring harness assembly (4) to bar assembly (5) .
Illustration 17 g00984590
Install two hose assemblies (2) .
Illustration 18 g00980904
Install four hose assemblies (1) .End By: Install both of the legs. Refer to Disassembly and Assembly, "Leg - (Remove and Install)".