6N7057 CORE ASSEM. Caterpillar parts
245
Rating:
Alternative (cross code) number:
CA6N7057
6N-7057
6N7057
CA6N7057
6N-7057
6N7057
Weight: 120 pounds 54 kg.
EXCAVATOR,
Compatible equipment models: 6N7057:
Number on catalog scheme:
6
For full view, you need register
Information:
Removal Procedure
Illustration 1 g00540870
Typical example
Loosen all of the bolts that fasten the fan guard assembly to the fan shroud. Remove fan guard assembly (1) from the fan shroud.
Loosen bolts (2) and slide alternator (3) toward the engine.
Maneuver V-belts (4) around the fan and remove the V-belts. Note: Never replace one V-belt. Always replace sets of V-belts, if equipped.Installation Procedure
Illustration 2 g00540870
Typical example
Install V-belts (4) behind the fan and on the correct pulleys.
Slide alternator (3) away from the engine. Tighten bolts (2) and check the belt tension. Refer to Specifications , RENR2401, "Belt Tension Chart" for the correct belt tension. Note: If the V-belt cannot be checked with a gauge, press on the V-belt at the center of the longest free length in order to check the deflection. Under a moderate amount of pressure, the V-belt should have a deflection of 10.0 mm (0.40 inch).
Put fan guard assembly (1) in position on the fan shroud. Install the bolts that fasten the fan guard assembly to the fan shroud.
Illustration 1 g00540870
Typical example
Loosen all of the bolts that fasten the fan guard assembly to the fan shroud. Remove fan guard assembly (1) from the fan shroud.
Loosen bolts (2) and slide alternator (3) toward the engine.
Maneuver V-belts (4) around the fan and remove the V-belts. Note: Never replace one V-belt. Always replace sets of V-belts, if equipped.Installation Procedure
Illustration 2 g00540870
Typical example
Install V-belts (4) behind the fan and on the correct pulleys.
Slide alternator (3) away from the engine. Tighten bolts (2) and check the belt tension. Refer to Specifications , RENR2401, "Belt Tension Chart" for the correct belt tension. Note: If the V-belt cannot be checked with a gauge, press on the V-belt at the center of the longest free length in order to check the deflection. Under a moderate amount of pressure, the V-belt should have a deflection of 10.0 mm (0.40 inch).
Put fan guard assembly (1) in position on the fan shroud. Install the bolts that fasten the fan guard assembly to the fan shroud.
Caterpillar parts catalog:
Parts core Caterpillar catalog:
16G, 245, 3406B, 3412, D4D, D6C
245, 3408, 589, 627E, 637D, 657E, 826C, 980C, 988B, G3408
16G, 16H NA, 245, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3456, 375, 375 L, 5080, 578, 583R, 587R, 589, 621E, 621F, 621G, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631D, 631E, 631G, 633E II, 6...
16H NA, 245, 3406, 3406B, 3406C, 578, 583R, 587R, 621, 621B, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 814B, 824C, 824G, 825G, 826C, 826G, 980C, 980G, D350E, D400E, D8N, D8R, D8R II, HT400, PM-465, RM...
7K6423
CORE
225, 235, 245, 814, 816, 950
225, 235, 245, 814, 816, 950
7N9471
CORE ASSEM.
245, 245B
245, 245B
235, 988
621, 980, D6C, D7G
7N9471
CORE ASSEM.
245, 245B
245, 245B
930, 950, 955K, 966C, D6C
7W8891
CORE AS.
235B, 235C
235B, 235C
5C0260
CORE AS-HYDRAULIC COOLER
215, CS-643
215, CS-643