CORE AS-EXCITER 7C1483 - Caterpillar

Installation Procedure for the Plate Assembly and Replacement of the Limit Switch
Use the following information for the installation of the new plate assembly and the replacement of the limit switch.
Illustration 1 g01617177
Location Of The Control Lever Gp (A) Control Lever Gp
Disconnect the wiring harness from the nonserviceable item 167-7080 Control Lever Gp or the nonserviceable item 161-3752 Control Lever Gp. Remove control lever gp (A) from the platform.
Illustration 2 g01617193
Components In The Control Lever Gp (1) 2Y-5685 Retaining Ring (2) 178-5649 Spacer (3) 178-5517 Spring (4) 9X-6032 Bolt (B) 178-5504 Plate As (C) 163-6785 Limit Switch As
Illustration 3 g01617195
Location Of The 9X-6032 Bolt
Remove two retaining rings (1). Remove two spacers (2). Remove spring (3), bolt (4), and plate assembly (B) .
Remove the limit switch assembly (C) .
Install a new 163-6785 Limit Switch As (C) .
Illustration 4 g01617196
316-8874 Plate As
Illustration 5 g01617197
Assembled Control Lever Gp (6) 316-8874 Plate As
Install the new plate assembly (6). Install bolt (4) in order to hold the lever in the correct position. Install spring (3), two spacers (2), and two retaining rings (1) .
Install the control lever gp on the platform. Connect the wiring harness for the nonserviceable item 167-7080 Control Lever Gp or for the nonserviceable item 161-3752 Control Lever Gp .