CORE AS-AFTERCOOLER 7C3386 - Caterpillar

Illustration 1 g03829687
Table 1
Specification For 363-5928 Track Gp(1)
Item Qty Part Specification Description
- - - Use the following procedure to tighten the track bolts:
1. Tighten the track bolts to 400 70 N m (295 52 lb ft).
2. Tighten the track bolts to an additional turn of 120 5 degrees.
- - - The maximum assembly force for the track link assembly is 665000 N (149499 lb).
- - - The reference setting force is 475000 N (106785 lb).
- - - The plug (2) must not be recessed below the surface of the stopper (3) after assembly.
A - - Distance from the end of the plug (2) to the surface of the stopper (3) is 0 to 2 mm (0.0 to 0.1 inch).
B - - Distance from the end of the pin (1) to the surface of the stopper (3) is 8.0 4.0 mm (0.31 0.16 inch).
C - - Bushing protrusion at each end is 1.80 0.13 mm (0.071 0.005 inch).
D - - Protrusion at one end of the pin is 4.90 0.80 mm (0.193 0.032 inch).
E - - Distance between the bolt hole is 137.29 0.39 mm (5.405 0.015 inch).
F - - Distance between the bolt holes is 185.29 0.39 mm (7.295 0.015 inch).
G - - Distance between the bolt holes is 134.85 0.80 mm (5.309 0.032 inch).
H - - Distance between the bolt holes is 158.73 0.80 mm (6.249 0.032 inch).
- - - End play for the link assembly is 0.00 to 0.20 mm (0.000 to 0.008 inch).
(1) All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly.