CORE AS-OIL COOLER 7N0165 - Caterpillar

Automatic Mode for the Single Camera System
The single camera system is available only with the enabled automatic mode. The single camera system can be placed in "Standby" if the system is configured. Refer to "Standby Mode" for an explanation of the "Standby" option.Manual mode is intended for use only with the multiple camera applications. Manual mode is disabled for use in a single camera system.Note: If the single camera system can be placed in manual mode, notify Caterpillar service personnel.In a single camera system, the system will automatically display the camera view that is based on current machine operation which is determined by the system configuration. For example, the Caterpillar Work Area Vision System (WAVS) may be configured to display the view from a rearward looking camera when the operator selects reverse gear.Standby Mode
Your single camera system installation may be configured with the Standby feature that is enabled or disabled. If "Standby" is enabled, the display will remain dark unless the camera view has been activated by machine operation. Standby may be useful at the following times:
Travel at night.
Reverse will not be used.If the Standby feature is disabled and if the display is on constantly, the operator has the option of adjusting the brightness of the display. If the Standby feature is disabled and if the display is on constantly, the operator has the option of adjusting the contrast of the display.Automatic Mode for a Multiple Camera System
When the system is in the automatic mode, the system automatically selects the preferred camera view that is based on current machine operation which is determined by the system configuration. For example, WAVS may be configured to display the view from the rearward looking camera when the operator selects reverse gear.In a multiple camera system, the operator can override the automatic view by either of the following selections:
Selecting "Manual Mode" on the display
Pressing the "Alternate Camera" switchRefer to Illustration 1.
Illustration 1 g01168864
(1) Operator's console
(2) Alternate camera switch In the "Automatic" mode, automatic selection of each camera will be enabled and the appropriate camera will be activated. In automatic mode, the display can also be placed in "Standby".Note: The preferred camera view will always be shown on the display screen unless the display is placed in "Manual" mode.Alternate Camera Switch
The Alternate camera switch allows the third camera to be activated. In the example of the Off-Highway Truck, the third camera is the side camera. The switch is a momentary switch that will need to be held down in order to activate the third camera. The image on the display will return to the front camera or the rear camera when the switch is released. This action is dependent on the camera that has been activated by the machine. If the switch is configured, this switch may also be providing power to a light that is concentrating on the viewing area of the side camera. If the system is configured correctly, the light will turn on when the camera is activated with the alternate