CORE A.9M6031 7S1852 - Caterpillar

Illustration 2 g00330103
This warning label is located on either side of the sun visor.
g00103591
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Certification of the Falling Objects Protective Structure
Illustration 3 g00330163
This warning is located on the overhead guard (if equipped).
g00103593
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
Improper Connections for Jump Start Cables
Illustration 4 g00103595
This warning is located on the battery box.
g00104283Read Operation and Maintenance Manual, "Starting with Jump Start Cables" before attempting to jump start your machine.Reversed Control Functions
Illustration 5 g00103597
This warning is located in the cab.
g00103797
FUNCTIONS OF STEERING AND TRANSMISSION DIRECTION CONTROLS ARE REVERSED WHEN BOOM IS OVER REAR AXLE.FAILURE TO PROPERLY CONTROL MACHINE CAN RESULT IN PERSONAL INJURY.
Automatic Engine Control (AEC)
Illustration 6 g00103802
This warning label is positioned in the cab.
g00100749
Automatic Engine Speed Control (AEC) will increase engine speed automatically when you operate the control lever(s) and/or travel pedals with AEC switch ON.When loading and unloading machine from truck or working in close quarters always turn off AEC switch to prevent any possibility of sudden movement of machine, which could result in serious injury or death.
Fixed Cab Riser
Illustration 7 g00189267
This warning label is located on the access door on the left side of the machine.
g00106940Bodily injury can occur from unexpected contact with open cab doors on machines that are equipped with a fixed cab riser.To avoid injury, close the cab door before climbing onto the rear of the machine.