7S2244 CORE ASSEM. Caterpillar parts
950
Rating:
Alternative (cross code) number:
CA7S2244
7S-2244
7S2244
CA7S2244
7S-2244
7S2244
Weight: 146 pounds 66 kg.
Information:
CORE DEPTH
112.776
mm
CORE HEIGHT
774.7
mm
CORE WIDTH
666.75
mm
FINS PER 25.4 MM
8
NUMBER OF TUBE ROWS
6
TUBE CONFIGURATION
CANTED
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
RAParts 7S2244 Radiator Core Fits Caterpillar Industrial/Construction Model: 950
Reliable Aftermarket Parts One (1) New Aftermarket Replacement Radiator Core || Fits Caterpillar Industrial/Construction Model: 950 || Replaces Part Number: 7S2244 || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering.
Reliable Aftermarket Parts One (1) New Aftermarket Replacement Radiator Core || Fits Caterpillar Industrial/Construction Model: 950 || Replaces Part Number: 7S2244 || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering.
7S2244 CORE A-Radiator (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 235.4 lbs || Dimensions: 10-33.78-37.68 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 235.4 lbs || Dimensions: 10-33.78-37.68 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 7S2244:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 129-6671 Reaction Sleeve 1
129-6672 Puller Plate 1
129-6673 Bearing Pilot 1
129-6674 Backup Plate 1
6F-7032 Bolt 1
1P-5542 (1) Taperlock Stud 1
C 8S-2241 (2) Camshaft Bearing Tool Group 1
( 1 ) Part of 1P-5545 Adapter Gp
( 2 ) All of the tools that are listed above are used with Tooling (C) .
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01016694
Position new camshaft bearings (1) in Tooling (A) and install the bearings from the rear to the front of the engine.
Location of the camshaft bearing lubrication holes is critical. Position the clinch butt joint up for all seven camshaft bearings. The No. 1 camshaft bearing oil hole is located 115 degrees counter clockwise from top center to align with the oil supply passage in the block. Camshaft bearings No. 2 through No. 7 are installed with the oil hole 45 degrees clockwise from top center. All are viewed from the front of the engine. Camshaft bearings 1,2,3,4,5, and 6 are the same width. Camshaft bearing No. 7 has a smaller width. Refer to the Specifications Manual for more information.
End By:
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Install the lifter group. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 129-6671 Reaction Sleeve 1
129-6672 Puller Plate 1
129-6673 Bearing Pilot 1
129-6674 Backup Plate 1
6F-7032 Bolt 1
1P-5542 (1) Taperlock Stud 1
C 8S-2241 (2) Camshaft Bearing Tool Group 1
( 1 ) Part of 1P-5545 Adapter Gp
( 2 ) All of the tools that are listed above are used with Tooling (C) .
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01016694
Position new camshaft bearings (1) in Tooling (A) and install the bearings from the rear to the front of the engine.
Location of the camshaft bearing lubrication holes is critical. Position the clinch butt joint up for all seven camshaft bearings. The No. 1 camshaft bearing oil hole is located 115 degrees counter clockwise from top center to align with the oil supply passage in the block. Camshaft bearings No. 2 through No. 7 are installed with the oil hole 45 degrees clockwise from top center. All are viewed from the front of the engine. Camshaft bearings 1,2,3,4,5, and 6 are the same width. Camshaft bearing No. 7 has a smaller width. Refer to the Specifications Manual for more information.
End By:
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Install the lifter group. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
Caterpillar parts catalog:
Parts core Caterpillar catalog:
120, 120G, 12E, 12F, 140, 14E, 2470C, 2570C, 2670C, 2864C, 414E, 416, 416B, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 426, 426B, 426C, 428, 428B, 428D, 428E, 430D, 430E, 430F, 432D, 432E, ...
12E, 3306, 941, 950, 955H, D4D, D5, D6C, D7F
7K6423
CORE
225, 235, 245, 814, 816, 950
225, 235, 245, 814, 816, 950
930, 950, 955K, 966C, D6C
5S7647
CORE ASSEM.
966C
966C
966C
3874367
CORE AS-RADIATOR
844K, 990K
844K, 990K
3876074
CORE AS-CONDENSER
950 GC
950 GC
3876053
CORE AS-OIL COOLER
950 GC
950 GC
3876052
CORE AS-AFTERCOOLER
950 GC
950 GC
980B
773, 834, 992, D8K
9S0324
CORE ASSEM.
824B
824B
6K9696
CORE
992
992