COUNTERSHAFT- 2163558 - Caterpillar

During the power up process, the display will perform a self test, a screen similar to Illustration 44 will appear.
Illustration 44 g02414036
During the self test, the display will ensure that all of the components are communicating and the alarm on the display will sound momentarily. When the self test is completed, the following occurs:
The system status indicator will turn green.
The cameras will be active.
The object detection view screens will be active.Note: Ensure that the model of machine listed on the lower right corner of the start-up screen matches the machine that is being operated. Refer to Illustration 44.If the self test fails, the system status indicator will turn red, the camera screens will be active, and the object detection screen will be disabled. If the self test fails, contact your Caterpillar dealer.Display Navigation
Display Features
Illustration 45 g02411923
(1) Camera View (2) Arrows Button (3) "OK" Button (4) Tab Button (5) Brightness Button (6) Alarm Check (7) Alarm (8) System Status Indicator (9) Proximity Bar (10) Product IDDisplay Buttons
Arrow button - The arrow button is used in order to perform the following functions:
Toggle the display between the camera views (front, rear, left, and right)
Highlight a selection (up/down and left/right)
Manually adjust brightness level after the brightness button is depressed (right/ left)
OK button - The "OK" button is used in order to edit settings. The operator must press the "OK" button to enter the settings. After pressing the "OK" button, the first parameter in the list that can be configured will be highlighted. The highlighted parameter can then be changed.
Tab button - Use the tab button in order to change the active screen between the main screen,