COUNTERWEIGHT 0091996 - Caterpillar

1. Loosen hose clamps (1) on the inlet manifold. 2. Loosen clamps (2), and slide them back on tubes (3). 3. Remove two bolts (5); then remove turbocharger (4) from the cylinder block and inlet manifold. 4. Remove the two O-ring seals (6) from the cylinder block.Install Turbocharger
1. Inspect all O-ring seals for wear or damage. Put a small amount of clean engine oil on the O-ring seals.2. Put O-ring seals (1) in position in the cylinder block. 3. Put turbocharger (2) in position on the cylinder block, and install the two bolts (4) that hold it.4. Tighten hose clamps (3) on the inlet manifold. 5. Put clamps (5) in position, and tighten them.