COUNTERWEIGHT 1R8072 - Caterpillar

1R8072 COUNTERWEIGHT Caterpillar parts E200B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1R8072
1R-8072
1R8072

Weight: 0.80 pounds 0 kg.

Buy COUNTERWEIGHT 1R8072 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 1R8072:

EXCAVATOR E200B Caterpillar

Number on catalog scheme: None

Caterpillar 1R8072 Parts scheme COUNTERWEIGHT

For full view, you need register

Information:

Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses and all tubes. This will help prevent fluid loss and this will help to prevent contaminants from entering the system.
Illustration 1 g01005456
Remove four bolts (1) and the washers.
Remove cover (2) .
Illustration 2 g01005457
Disconnect electrical connector (4) located under tube assembly (3) .
Remove electrical connector (4) from the clip.
Illustration 3 g01005458
Loosen two clamps (5) and two clamps (6). Remove tube assembly (3) .
Illustration 4 g01005459
Disconnect hose assembly (7) from tube assembly (9) .
Remove bolt (8) and the washer.
Illustration 5 g01005461
Remove two bolts (10), four bolts (11) and the washers.
Remove tube assembly (9). Remove the O-ring seal from tube assembly (9) .
Illustration 6 g01005463
Remove two bolts (13), the nuts and washers from two clamps (12) and clamp (14) .
Remove two clamps (12) .
Illustration 7 g01005466
Loosen four hose clamps (15) and remove two tube assemblies (16) .
Illustration 8 g01006191
View from under the power train oil cooler
Remove two bolts (18), the nuts, washers and two clamps (17), (one clamp obscured). Remove bracket (19) .
Illustration 9 g01006193
Remove eight bolts (23) and the washers. Remove two bolts (21), the washers and oil filler tube assembly (20). Remove the O-ring seals from two tube assemblies (22) .
Illustration 10 g01006907
Attach a hoist and suitable lifting sling to power train oil cooler (26). The weight of the power train oil cooler (26) is 27 kg (60 lb).
Remove four bolts (24), the washers and bracket (25) .
Illustration 11 g01006908
Remove four bolts (27) and the washers.
Illustration 12 g01006909
Remove power train oil cooler (26) from the machine. Remove the gasket from power train oil cooler (26) .
Illustration 13 g01006910
Remove six bolts (28), the washers and bonnet (29) .