2447839 COUNTERWEIGHT AS Caterpillar parts
365C
Rating:
Alternative (cross code) number:
CA2447839
244-7839
2447839
CA2447839
244-7839
2447839
EXCAVATOR,
Compatible equipment models: 2447839:
Number on catalog scheme:
4
For full view, you need register
Information:
Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the tubes in the engine oil cooler core.
Illustration 1 g01135796
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (20) and spring (19) in elbow (12). Install O-ring seal (18) and lubricate the O-ring seal with clean engine oil. Install cover (21) and bolts (22).
Illustration 2 g01135915
Install gasket (16) and oil cooler bonnet (14) on engine oil cooler core (1) in the orientation that was noted during the disassembly procedure. Install bolts (13).
Install the O-ring seal and cover (17).
Install the O-ring seal and drain plug (15).
Install the O-ring seal and elbow (12) on the engine oil cooler core. Install bolts (11).
Install the O-ring seal on tube (4). Apply clean engine oil on the O-ring seal. Install tube (4) in elbow (12).
Illustration 3 g01135749
Install gasket (2) and oil cooler bonnet (3) on engine oil cooler core (1) in the orientation that was noted during the disassembly procedure. Install bolts (10).
Install O-ring seal (5) on tube (4). Apply clean engine oil on the O-ring seal. Install elbow (6) on tube (4).
Position gasket (8) and elbow (6) on engine oil cooler core (1). Install bolts (7).
Position the gasket and cover (9) on elbow (6). Install the bolts. End By:
Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the tubes in the engine oil cooler core.
Illustration 1 g01135796
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (20) and spring (19) in elbow (12). Install O-ring seal (18) and lubricate the O-ring seal with clean engine oil. Install cover (21) and bolts (22).
Illustration 2 g01135915
Install gasket (16) and oil cooler bonnet (14) on engine oil cooler core (1) in the orientation that was noted during the disassembly procedure. Install bolts (13).
Install the O-ring seal and cover (17).
Install the O-ring seal and drain plug (15).
Install the O-ring seal and elbow (12) on the engine oil cooler core. Install bolts (11).
Install the O-ring seal on tube (4). Apply clean engine oil on the O-ring seal. Install tube (4) in elbow (12).
Illustration 3 g01135749
Install gasket (2) and oil cooler bonnet (3) on engine oil cooler core (1) in the orientation that was noted during the disassembly procedure. Install bolts (10).
Install O-ring seal (5) on tube (4). Apply clean engine oil on the O-ring seal. Install elbow (6) on tube (4).
Position gasket (8) and elbow (6) on engine oil cooler core (1). Install bolts (7).
Position the gasket and cover (9) on elbow (6). Install the bolts. End By:
Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Caterpillar parts catalog:
Parts counterweight Caterpillar catalog:
2737927
COUNTERWEIGHT AS
385C, 385C FS, 385C L
385C, 385C FS, 385C L
2505086
COUNTERWEIGHT AS
385C, 385C L
385C, 385C L
3335070
COUNTERWEIGHT AS
330D, 330D L, 336D, 336D2
330D, 330D L, 336D, 336D2
3301285
COUNTERWEIGHT GP
330D L, 330D LN, 336D L, 336D LN, 336D2 L
330D L, 330D LN, 336D L, 336D LN, 336D2 L
3301282
COUNTERWEIGHT AS
330D L, 336D, 336D L, 336D2, 340D2 L
330D L, 336D, 336D L, 336D2, 340D2 L
2784048
COUNTERWEIGHT AS
330D L, 330D LN, 336D L
330D L, 330D LN, 336D L
2737954
COUNTERWEIGHT AS
365C, 365C L
365C, 365C L