COUNTERWEIGHT AS 2500122 - Caterpillar

2500122 COUNTERWEIGHT AS Caterpillar parts M316C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2500122
250-0122
2500122

Buy COUNTERWEIGHT AS 2500122 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEELED EXCAVATOR,

Compatible equipment models: 2500122:

WHEELED EXCAVATOR M316C Caterpillar

Number on catalog scheme: 1

Caterpillar 2500122 Parts scheme COUNTERWEIGHT AS

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 136-4149 Governor Pliers 1 Start By:
Remove the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00613071
Remove clip (4). Clip (4) is located between the governor and the cylinder head.
Illustration 2 g00655975
Use Tooling (A) to slide tube assembly (5) into the cylinder head.
Illustration 3 g00613149
Remove the clip and use Tooling (A) to remove the clevis pin (6). Clevis pin (6) connects the governor to the control lever of the fuel injection control linkage. Note: Clevis pin (6) must stay with the governor in order to be adjusted.
Illustration 4 g00630566
Remove bolts (1) and remove fuel injection control linkage (2). Control lever (3) connects the fuel injection control linkage (2) to the governor. Note: For information on the inspection procedure for control lever (3), refer to Special Instruction, REHS0601, "Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage".