COUNTERWEIGHT AS 3336698 - Caterpillar

Illustration 2 g00275786
Connect tube (30) to fitting (33). Make sure that the tube is securely seated in the fitting.
Illustration 3 g00275785
Position wiring harness (26). Connect two electrical connectors (31) in the original positions. Install tie-wraps (32) to secure wiring harness (26) to scissor assembly (15).
Illustration 4 g00275783
Connect tube (30) to fitting (28). Make sure that the tube is securely seated in the fitting. Apply Tooling (A) to the threads of bolt (27). Position air spring (29) on the scissor assembly. Install bolt (27) to secure air spring (29). Tighten bolt (27) to a torque of 4.3 1 N m (38 9 lb in).
Illustration 5 g00275782
Install wiring harness connection (25) and the washer in upper housing (24). Install new tie-wraps on wiring harness (26) to secure the wiring harness to the upper housing.
Illustration 6 g00275780
Install scissor assembly (15) in upper housing (24) by sliding rollers (21) into the slider track. Slide bumper (22) into the slider track to secure the scissor assembly. Install two tether belts (16), bolts (23) and the locknuts in upper housing (24). Tighten bolts (23) to a torque of 40 8 N m (30 6 lb ft).
Illustration 7 g00275778
Install two bearings (17), damper (18), pin (20) and nut (10) into lower housing (14). Tighten nut (19) to a torque of 40 8 N m (30 6 lb ft).
Illustration 8 g00275777
Install scissor assembly (15) into lower housing (14). Connect the damper and two tether belts (16) to lower housing (14).
Illustration 9 g00275776
Illustration 10 g00275755
Apply 9S-3263 Thread Lock on bolt (10). Position the air spring on lower housing (14). Install bolt (10). Tighten bolt (10) to a torque of 4.3 1 N m (38 9 lb in). Install two shafts (13). Install four locknuts (11) and lock washers (12). Tighten locknuts (11) to a torque of 40 8 N m (30 6 lb ft).
Illustration 11 g00275754
Install bushing (9) into the lower housing.
Illustration 12 g00275753
Install boot (8).
Illustration 13 g00291077
Position fore and aft slider track (7). Install two bolts (3), the washers, one bolt (2) and locknut (4). Tighten bolts (2) and (3) to a torque of 30 7 N m (22 5 lb ft). Also, tighten locknut (4) to a torque of 30 7 N m (22 5 lb ft).
Illustration 14 g00275751
Install four slides (1).
Install the seat on the air suspension. Install the seat assembly in the machine.