COUNTERWEIGHT & MOUNTING GP 3905150 - Caterpillar

(7) Switch for the Automatic Retarder Control System (If Equipped) - For more information, refer to Operation and Maintenance Manual, "Retarding".
(8) Traction Control System Switch (If Equipped) - For more information, refer to Operation and Maintenance Manual, "Traction Control System (TCS) - Test".
(9) Operator Mode Scroll Switch - For more information, refer to Operation and Maintenance Manual, "Operator Mode Scroll Switch". Note: Earlier machines used a check mark as an icon for the Operator Mode Scroll Switch.
(10) Engine Start Switch - For more information, refer to Operation and Maintenance Manual, "Engine Starting".
(11) Air Conditioning Switch (If Equipped) - For more information, refer to Operation and Maintenance Manual, "Heating and Air Conditioning Control".
(12) Body Up Sound Reduction Switch (If Equipped) - The switch reduces the high idle speed of the engine to 1800 RPM when the body is raised. This reduces the sound levels from the exhaust for the operator and for the nearby personnel.
(13) Brake Release and Secondary Steering Switch - For more information, refer to the sections that follow.
Operation and Maintenance Manual, "Braking"
Operation and Maintenance Manual, "Towing the Machine"
Operation and Maintenance Manual, "Secondary Steering - Test"
Illustration 4 g00793258
(14) Hazard Flasher Switch - Push the top half of switch (14) in order to turn on the hazard flashers. Push the bottom half of the switch in order to turn off the hazard flashers.
Illustration 5 g00793261
(15) Secondary Brake Control Pedal (16) Service Brake Control Pedal (17) Accelerator Pedal
Illustration 6 g00848334
(18) Parking Brake Reset Valve
(19) Parking Brake Switch (20) Transmission Control LeverShift Pattern
Illustration 7 g01012497
Typical Shift Pattern (A) Reverse Position (B) Neutral Position (C) First Gear Forward (D) Second Gear Forward (E) Third Gear Forward (F) Fourth Gear Forward (G) Fifth Gear Forward (H) Sixth Gear Forward (I) Seventh Gear ForwardRefer to Operation and Maintenance Manual, "Direction and Speed Control" for more information about the operation of the transmission control lever.
Illustration 8 g00848340
(21) Retarder Control Lever - For more information, refer to Operation and Maintenance Manual, "Retarding".
Illustration 9 g01157902
(22) Exhaust Diverter Switch (If Equipped) - The switch can be set in the MUFFLER position or the AUTO position.