AVSPARE.COM
parts catalog

COUNTERWEIGHT AS 5089119 - Caterpillar



5089119 COUNTERWEIGHT AS Caterpillar parts COUNTERWEIGHT
Rating:
21
Alternative (cross code) number:
CA5089119
508-9119
5089119
Caterpillar 5089119 COUNTERWEIGHT AS

Buy COUNTERWEIGHT AS 5089119 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 2
 
  For full view, you need register

Information:

Secondary ECM Monitoring
Table 5 contains a list of codes that can be generated by the secondary ECM. The secondary ECM provides backup control for the engine. If a problem is detected with the primary ECM, the secondary ECM will provide control for the critical engine components. The table contains the default settings for the applicable codes for your engine. Use Cat ET to view the minimum and maximum ranges for the parameters.
Table 5
Monitoring System Parameters
Event Code Level of Severity Default Delay Time in Seconds Default Trip Point Maximum Engine Derate (%) Default State
E96 High Fuel Pressure (1) 8 1020 kPa (148 psi) N/A Always On
(2) 10 35 Off
(3) 12 N/A
E198 Low Fuel Pressure (1) 10 Pressure drops below 500 kPa (72.5 psi) at engine speeds above 1200 rpm N/A On
(2) Pressure drops below 450 kPa (6. psi) at engine speeds above 1200 rpm 50
(3)(2) N/A N/A Off
E199 Low Coolant Temperature (1) 5 80 °C (176 °F) N/A On
E360 Low Oil Engine Pressure (1) 4 Refer to Illustration 2 N/A Always On
(3)(2) 10 N/A
E361 High Engine Coolant Temperature (1) 5 95 °C (203 °F) N/A Always On
(2) 30 98 °C (208 °F) 100 On
(3)(2) 5 105 °C (221 °F) N/A Always On
E362 Engine Overspeed (1) 0 (1) N/A Always On
(3)(2) (2) N/A On
E539 High Intake Manifold Air Temperature (1) 4 80° C (176° F) N/A Always On
(2) 90 °C (194 °F) 70 On
(3)(2) 100 °C (212 °F) N/A
E1044 High Intake Manifold Pressure (1) 8 500 kPa (73 psi) N/A Always On
(2) Not currently available
(3)
E2112 Low Engine Coolant Pressure (1) 30 Refer to Illustration 3 N/A On
(1) This parameter is set to 115% of the rated speed of the engine for this application. Refer to Cat ET for the rated speed of the engine.
(2) This parameter is set to 118% of the rated speed of the engine for this application. Refer to Cat ET for the rated speed of the engine.
Illustration 2 g02457101
Oil pressure map for the engine monitoring system (reference information)
Illustration 3 g02457737
Coolant block inlet pressure map for the engine monitoring system (reference information)
Illustration 4 g02457736
SCAC coolant pressure map for the engine monitoring system (reference information)
Separate timers are used in the ECM for each response that is associated with a parameter. If a trip point is reached, the timer for that event is started.

Caterpillar parts catalog:

Caterpillar parts catalog
814K Wheel Dozer T1Z00001-UP (MACHINE) POWERED BY C7.1 Engine
814K Wheel Dozer LW400001-UP (MACHINE) POWERED BY C7.1 Engine
814K Wheel Dozer WCM00001-UP (MACHINE) POWERED BY C7.1 Engine


Parts counterweight Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.