AVSPARE.COM
parts catalog

COUPLER AR-QUICK 3727403 - Caterpillar



3727403 COUPLER AR-QUICK Caterpillar parts 966M, 966M XE, 972M, 972M XE COUPLER
Rating:
24
Alternative (cross code) number:
CA3727403
372-7403
3727403
Caterpillar 3727403 COUPLER AR-QUICK

Buy COUPLER AR-QUICK 3727403 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 3727403:

WHEEL LOADER  966M   966M XE   972M   972M XE   Caterpillar
  For full view, you need register

Information:


Before doing any service work which requires separating a track, a thorough inspection of the front track roller frame must be made. See Special Instruction, Form No. SMHS8273-02
Start By:a. separate track
The tractor could fall off the supports when the track roller frames are removed if it is on a slope or soft footing. To prevent possible personal injury, the tractor must be on a level, hard surface before the track roller frames are removed.
1. Put tooling (A), bar stock, in position between the equalizer bar and main frame on the same side that the track roller frame is to be removed from. This will keep the equalizer bar in its original position when the track roller frame is removed. 2. Remove the four bolts and panel (1) from the front of the tractor. 3. Raise the rear of the tractor until track guides (2) are above the track links. Put tooling (B) in position under the tractor as shown. Lower the tractor onto tooling (B). 4. Put two 50 ton screw jacks (3) in position, and raise the front of the tractor until track guides (4) are above the track links. 5. Put tooling (C) in position under the roller frame as shown. Use tooling (C) to put pressure on the track roller frame. 6. Remove bolt (6) from the equalizer bar pin and the track roller frame. Install tooling (D) on each side of the pin, between the equalizer bar and the track roller frame as shown.7. Use tooling (E) and remove equalizer bar pin (5) from the front side of the equalizer bar as shown. Make sure tooling (D) stays tightly in position while the equalizer bar pin is being removed. 8. Remove the bolts and push arm trunnion (7) from the track roller frame. 9. Use tooling (F) and remove retainer (8) from the track roller frame. 10. Fasten chain (11) between the rear track roller frame and the front track roller frame to keep the front track roller frame in position.11. The weight of the track roller frame with six rollers and two idlers is 1500 kg (3,300 lb). Attach a hoist, and use tooling (G) with chain (10) positioned as shown. Raise the track roller frame, and remove tooling (C).12. Remove the bolts and plate (9) from the end of the pivot shaft. Remove the washer that is behind plate (9).13. Remove the track roller frame by pulling it off the pivot shaft. 14. Remove seal (13) and sleeve (12) from the pivot shaft. 15. If necessary, remove bearings (14) and (15) from the track roller frame.Install Track Roller Frames
1. Lower the temperature of bearings (14) and (15), and install them in the track roller frame. Make sure they are against the shoulders in the track roller frames. The diameter of bearing (14), after assembly, must be 101.955 0.101 mm (4.014 0.004 in). The diameter of bearing (15), after assembly, must be 174.736 0.101 mm (6.879 0.004 in). 2.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Cat SIS web machinery list:

Caterpillar parts catalog
966M XE Wheel Loader DZL00001-UP (MACHINE) POWERED BY C9.3 Engine
966M Wheel Loader R8D00001-UP (MACHINE) POWERED BY C9.3 Engine
966M XE Wheel Loader B8P00001-UP (MACHINE) POWERED BY C9.3 Engine
972M XE Wheel Loader M5S00001-UP (MACHINE) POWERED BY C9.3 Engine
966M Wheel Loader EJA00001-UP (MACHINE) POWERED BY C9.3 Engine
966M XE Wheel Loader FL200001-UP (MACHINE) POWERED BY C9.3 Engine
966M Wheel Loader GMS00001-UP (MACHINE) POWERED BY C9.3 Engine
972M Wheel Loader A8P00001-UP (MACHINE) POWERED BY C9.3 Engine
972M Wheel Loader JPR00001-UP (MACHINE) POWERED BY C9.3 Engine
966M Wheel Loader KJP00001-UP (MACHINE) POWERED BY C9.3 Engine
966M Wheel Loader DYC00001-UP (MACHINE) POWERED BY C9.3 Engine
966M XE Wheel Loader P6C00001-UP (MACHINE) POWERED BY C9.3 Engine
972M XE Wheel Loader EDW00001-UP (MACHINE) POWERED BY C9.3 Engine


Parts coupler Caterpillar catalog:

3727404 COUPLER AR-QUICK
966M, 966M XE, 972M, 972M XE
3887401 COUPLER AR-QUICK
966M, 966M XE, 972M, 972M XE
3932679 COUPLER AR-QUICK
966M, 966M XE, 972M, 972M XE
1645567 COUPLER AS-QUICK DISCONNECT
1090, 1190, 1190T, 1290T, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262...
8T5373 COUPLER-MALE
5110B, 5130, 5130B, 5230, 5230B, 621E, 621F, 623E, 627E, 627F, 627G, 631E, 637E, 637G, 651E, 657E, 824G, 824G II, 825G, 826G, 844, 844H, 953D, 963D, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972...
1946848 COUPLER
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 735, 735B, 740, 740B, 963D, 966M, 966M XE, 972M, 972M XE, 986H, D6T LGP, D6T XL, D7E, D7E LGP
1716726 COUPLER AS
844, 966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, 990 II
2757635 COUPLER AR-QUICK
330D L, 330D LN, 336D L, 336D LN, 336E LN, CW-10
3887401 COUPLER AR-QUICK
966M, 966M XE, 972M, 972M XE
1690356 COUPLER AR-QUICK
318B, 318C, 319C, CW-10, M318, M318C, M318D
3888214 COUPLER GP-QUICK
236D, 242D, 257D, 259D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.