COUPLER GP-QUICK 4232551 - Caterpillar

Literature Information
This manual contains safety information, operation instructions and maintenance information and should be stored with the tool groupSome photographs or illustrations in this publication may show details that can be different from your service tool. Guards and covers might have been removed for illustrative purposes.Continuing improvement and advancement of product design might have caused changes to your service tool, which are not included in this publication.Whenever a question arises regarding your service tool or this publication, consult Dealer Service Tools (DST) for the latest available information.Safety Section
The Safety Section lists basic safety precautions.Read and understand the basic precautions listed in the Safety section before operating or performing maintenance and repair on this service tool.General Information Section
The General Information Section describes tooling functions and features. The section provides useful information on individual parts, additional tooling, and resources.Operation Section
The Operation Section is a reference for the new operator and a refresher for the experienced operator.Photographs and illustrations guide the operator through correct procedures for using the tool group.Operating techniques outlined in this publication are basic. Skill and techniques develop as the operator gains knowledge of the service tool and the tools capabilities.Maintenance Section
The Maintenance Section is a guide to tool inspection, cleaning, storage, and tool disposalService Parts Section
The Service Parts Section is a reference for parts identification and available part numbers. 323-1146 C175 Engine Lifting Bracket
Used to remove and install the C175 Engine.
Illustration 2 g02444120
European Union Compliant, CE MarkedGeneral Safety
Illustration 3 g02448886
Operation
Refer to appropriate D&A Service Manual for mounting and lifting hardware and correct location of lifting points.
Illustration 4 g02448896
Illustration 5 g02448897
Illustration 6 g02448898
Inspection
Inspect prior to each use for nicks, burrs, dents, cracks, bends, or worn parts. If damage is found, discontinue use until inspected and released for use by an approved inspector at the dealership. Inspect annually by an approved inspector at the dealership. If damage is beyond repair, destroy the tool as scrap.Do not use unless load identification markings are legible.
Illustration 7 g02448919
Illustration 8 g02448920
Illustration 9 g02448921
Illustration 10 g02448922
Illustration 11 g02448923
Tool Disposal
At the end of the operational life of the tool, destroy the tool and dispose of as scrap.