1242129 COUPLING-PERMANENT Caterpillar parts
216B3, 226B, 226B3, 232B, 242B, 242B3, 247B3, 252B3, 257B3, 259B3, AD30, BG-2455C, BG-245C
Rating:
Alternative (cross code) number:
CA1242129
124-2129
1242129
CA1242129
124-2129
1242129
Weight: 0.15 pounds 0 kg.
ASPHALT PAVER, UNDERGROUND ART TRUCK,
Compatible equipment models: 1242129:
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the front tires and rims. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install".
Remove the front drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Front) - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses and all tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain the oil from the fixed axle. Refer to Operation and Maintenance Manual, "Refill Capacities".
Illustration 1 g00841237
Disconnect hose assembly (1) from fixed axle (2) .
Disconnect harness assembly (3) .
Illustration 2 g01189541
Attach a suitable lifting device to each side of the fixed axle, as shown. The weight of the fixed axle is approximately 1134 kg (2500 lb).
Illustration 3 g00841243
Remove bolts (4) and cover (5) from each side of the fixed axle.
Remove bolts (6) and the washers.
Use the suitable lifting device to lower the fixed axle from the machine.
Start By:
Remove the front tires and rims. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install".
Remove the front drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Front) - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses and all tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain the oil from the fixed axle. Refer to Operation and Maintenance Manual, "Refill Capacities".
Illustration 1 g00841237
Disconnect hose assembly (1) from fixed axle (2) .
Disconnect harness assembly (3) .
Illustration 2 g01189541
Attach a suitable lifting device to each side of the fixed axle, as shown. The weight of the fixed axle is approximately 1134 kg (2500 lb).
Illustration 3 g00841243
Remove bolts (4) and cover (5) from each side of the fixed axle.
Remove bolts (6) and the washers.
Use the suitable lifting device to lower the fixed axle from the machine.
Caterpillar parts catalog:
Parts coupling Caterpillar catalog:
120G, 12G, 130G, 140G, 14G, 1676, 16G, 225, 225D, 229D, 231D, 235, 235C, 245, 245B, 30/30, 304, 305, 305.5, 306, 307E, 308E, 308E CR, 308E SR, 3126, 3304, 3304B, 3306, 3306B, 3406B, 3408, 3412, 3412C,...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 2470C, 247B, 247B3, 248, 252B, 252B3, 256C, 2570C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 26...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
3406, 3406B, 3406C, 3408, 3408B, 3456, AD30, C-18, PM-465, R2900, R2900G
16M, 215D, 229D, 231D, 235C, 235D, 245B, 245D, 24M, 5110B, 5130, 5230, 583T, 587T, 621B, 627B, 637D, 69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776C, 776D, 777, 777B,...
135H, 135H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16M, 215D, 229D, 231D, 235C, 235D, 245B, 245D, 24M, 5110B, 5130, 5130B, 517, 5230, 5230B, 527, 583T, 587T, 621B, 627B, 637D, 773F, 775F, 77...
135H, 135H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16M, 215D, 229D, 231D, 235C, 235D, 245B, 245D, 24M, 5110B, 5130, 5130B, 517, 5230, 5230B, 527, 583T, 587T, 621B, 627B, 637D, 773F, 775F, 77...
16M, 215D, 229D, 231D, 235C, 235D, 245B, 245D, 24M, 5110B, 5130, 5230, 583T, 587T, 621B, 627B, 637D, 69D, 768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776C, 776D...
69D, 936, 936F, 950F, 950G, 950G II, 960F, 962G, 966F, 966G, 966G II, 966H, 972G II, 980F, 980H, AD30, AD55, D6H, D6H II, D6H XR
1391485
COUPLING
AD30
AD30
3201728
COUPLING
AD30
AD30
3201746
COUPLING
AD30
AD30
1242128
COUPLING-ORFS
226B, 226B3, 232B, 242B, 24M, 980G, 993K, D400E
226B, 226B3, 232B, 242B, 24M, 980G, 993K, D400E
140M, 246C, 24M, 256C, 262C, 262C2, 272C, 631D, 637D, 657E, 773F, 775F, 777F, 797F, 966F II, 980C, 980G, AD45, AD55, AE40 II, D400E, HM415B, IT14G, MH3037, PC310B, R1600, R1600G, R1700G, SG16B, SW345B
140M, 246C, 24M, 256C, 262C, 262C2, 272C, 307, 621B, 627F, 631D, 637D, 657E, 777F, 777G, 785D, 797F, 966F II, 972G, 973C, 980C, 980G, AD30, AD45, AE40 II, D400E, D8N, D8R, HM415B, IT14G, MH3037, PC310...
2429532
COUPLING AS-PERMANENT
262C, 262C2, 272C, 287C, 287C2, 289C, 289C2, 297C, 299C
262C, 262C2, 272C, 287C, 287C2, 289C, 289C2, 297C, 299C
24M, 262C, 262C2, 272C, 287C, 287C2, 289C, 289C2, 297C, 299C, 777G, 785D, 797F, D400E, HEX-WEDGE, HM312, HM315, MH3037, PIN GRAB, SE60 V XW
1242168
COUPLING-PERMANENT
226B, 226B3, 232B, 242B, 267B, 777C, 777D
226B, 226B3, 232B, 242B, 267B, 777C, 777D
140B, 140G, 160G, 235, 235B, 3304B, 3306, 528, 572R, 815, 930R, 966C, 977K, 977L, D4E, D4E SR, D5B, D6C, D6D, D6E, D6E SR, D6F SR, D6G, D6G SR, D7G, D7G2, D7H, D7R
3304, 3306, 3406
3306, 3406, D342C, D353C
3453548
COUPLING
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 308E2 CR, 906H2, 907H2, 908H2, 910K, 914K
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 308E2 CR, 906H2, 907H2, 908H2, 910K, 914K
4391591
COUPLING AS
420F, 428F, 434F
420F, 428F, 434F
4391590
COUPLING
420F, 428F, 434F
420F, 428F, 434F