1517256 COUPLING GP-TORQUE LIMITING Caterpillar parts
RM-350B, RM-500
Rating:
Alternative (cross code) number:
CA1517256
151-7256
1517256
CA1517256
151-7256
1517256
RECLAIMER MIXER, ROAD RECLAIMER,
You can buy:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
DUCRES Hydraulic Motor for Sauer Danfoss OMR250-151-7256 OMR2501517256 151-7256 1517256
DUCRES Part Name:Hydraulic Motor || Part Number:OMR250-151-7256 OMR2501517256 151-7256 1517256 || APPlication: Compatible with Sauer Danfoss || Note:Please leave us physical address (home or office address) but not P.O box address. || Note:in Order To Avoid Unnecessary Returnplease Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want.
DUCRES Part Name:Hydraulic Motor || Part Number:OMR250-151-7256 OMR2501517256 151-7256 1517256 || APPlication: Compatible with Sauer Danfoss || Note:Please leave us physical address (home or office address) but not P.O box address. || Note:in Order To Avoid Unnecessary Returnplease Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want.
shsiyayh Hydraulic Motor for Sauer Danfoss OMR250-151-7256 OMR2501517256 151-7256 1517256
shsiyayh Part Name:Hydraulic Motor || Part Number:OMR250-151-7256 OMR2501517256 151-7256 1517256 || APPlication: Compatible with Sauer Danfoss || 1.Please tell us of your engine model or a view of nameplate when order this item to lower the error rate.Thanks. || 2.There are no instructions included in this kit.it is recommended to install professionally.
shsiyayh Part Name:Hydraulic Motor || Part Number:OMR250-151-7256 OMR2501517256 151-7256 1517256 || APPlication: Compatible with Sauer Danfoss || 1.Please tell us of your engine model or a view of nameplate when order this item to lower the error rate.Thanks. || 2.There are no instructions included in this kit.it is recommended to install professionally.
Nayuank Hydraulic Motor Compatible with Sauer Danfoss OMR250-151-7256 OMR2501517256 151-7256 1517256
Nayuank Part Name:Hydraulic Motor || Part Number:OMR250-151-7256 OMR2501517256 151-7256 1517256 || APPlication: for Sauer Danfoss || 1.Please leave us physical address (home or office address) but not P.O box address. || 2.in Order To Avoid Unnecessary Returnplease Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want.
Nayuank Part Name:Hydraulic Motor || Part Number:OMR250-151-7256 OMR2501517256 151-7256 1517256 || APPlication: for Sauer Danfoss || 1.Please leave us physical address (home or office address) but not P.O box address. || 2.in Order To Avoid Unnecessary Returnplease Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want.
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 1517256:
Information:
Components Of The 6V9050 Exhaust Stud Removal Group
1. 6V3073 Carrying Case2. 6V4094 Liner3. 5P7330 Lock Screw4. 6V7847 Fixture5. 6V9051 Block6. 6V9046 Bushing [for 7.938 mmØ (.312"Ø) drill]7. 6V9047 Bushing [for 3.175 mmØ (.125"Ø) drill]8. 6V9045 Bushing [for 9.5 mmØ (.375"Ø) bolt]9. 0S1571 Bolt10. 6V9049 Drill [3.175 mmØ (.125"Ø)]11. 6V9048 Drill [7.938 mmØ (.312"Ø)]12. 5P6732 ScrewInstallation And Use Of 6V9050 Exhaust Stud Removal Group
1 If broken stud (1) is more than 3.2 mm (.125") above the gasket surface, grind the end of stud (1) flat so it is less than this dimension. Be careful not to grind the surface of the cylinder head.2 Fasten 6V7847 Fixture (2) to the cylinder head using two 6V9045 Bushings (3) and two 0S1571 Bolts (4). 3 Put 6V9047 Bushing (5) in fixture (2). Use a 9.5 mm (.375") capacity drill and 6V9049 Drill (6) to drill through the broken stud.
Do not drill into the cylinder head. While drilling, periodically pull out the drill to remove chips and lubricate drill (6).
4 Remove bushing (5) and chips from the hole. Put 6V9046 Bushing (7) in fixture (2). Use 12.7 mm (.50") capacity drill and 6V9048 Drill (8) to drill out the remainder of the broken stud.
Do not drill into the cylinder head. While drilling periodically pull out the drill to remove chip and lubricate drill (8).
5 Remove the fixture from the cylinder head. Remove the tip of the stud from the cylinder head using 5P6732 Screw (9).6 Use a 3/8-16 tap (10) to remove any remaining stud threads from the hole. Do not make threads past the depth of the original threads. Clean the threaded hole. Inspect the threads for damage. If damaged, helicoils may be installed in the heads of 1100, 3100 and 3200 Series engines; on 3300 and 3400 Series engines, the cylinder head should be replaced with a new or exchange cylinder head.
1. 6V3073 Carrying Case2. 6V4094 Liner3. 5P7330 Lock Screw4. 6V7847 Fixture5. 6V9051 Block6. 6V9046 Bushing [for 7.938 mmØ (.312"Ø) drill]7. 6V9047 Bushing [for 3.175 mmØ (.125"Ø) drill]8. 6V9045 Bushing [for 9.5 mmØ (.375"Ø) bolt]9. 0S1571 Bolt10. 6V9049 Drill [3.175 mmØ (.125"Ø)]11. 6V9048 Drill [7.938 mmØ (.312"Ø)]12. 5P6732 ScrewInstallation And Use Of 6V9050 Exhaust Stud Removal Group
1 If broken stud (1) is more than 3.2 mm (.125") above the gasket surface, grind the end of stud (1) flat so it is less than this dimension. Be careful not to grind the surface of the cylinder head.2 Fasten 6V7847 Fixture (2) to the cylinder head using two 6V9045 Bushings (3) and two 0S1571 Bolts (4). 3 Put 6V9047 Bushing (5) in fixture (2). Use a 9.5 mm (.375") capacity drill and 6V9049 Drill (6) to drill through the broken stud.
Do not drill into the cylinder head. While drilling, periodically pull out the drill to remove chips and lubricate drill (6).
4 Remove bushing (5) and chips from the hole. Put 6V9046 Bushing (7) in fixture (2). Use 12.7 mm (.50") capacity drill and 6V9048 Drill (8) to drill out the remainder of the broken stud.
Do not drill into the cylinder head. While drilling periodically pull out the drill to remove chip and lubricate drill (8).
5 Remove the fixture from the cylinder head. Remove the tip of the stud from the cylinder head using 5P6732 Screw (9).6 Use a 3/8-16 tap (10) to remove any remaining stud threads from the hole. Do not make threads past the depth of the original threads. Clean the threaded hole. Inspect the threads for damage. If damaged, helicoils may be installed in the heads of 1100, 3100 and 3200 Series engines; on 3300 and 3400 Series engines, the cylinder head should be replaced with a new or exchange cylinder head.
Caterpillar SIS machinery equipment:
Caterpillar SIS
RM-350B Reclaimer Mixer AXW00001-UP (MACHINE) POWERED BY 3406C Engine »
151-7256
COUPLING GP-TORQUE LIMITING
RM-500 Reclaimer Mixer ASW00001-UP (MACHINE) POWERED BY C15 Engine »
151-7256
COUPLING GP-TORQUE LIMITING
RM-350B Reclaimer Mixer 7FS00001-UP (MACHINE) POWERED BY 3406C Engine »
151-7256
COUPLING GP-TORQUE LIMITING
RM500B Rotary Mixer MB900001-UP (MACHINE) POWERED BY C15 Engine »
151-7256
COUPLING GP-TORQUE LIMITING
Caterpillar parts catalog:
Parts coupling Caterpillar catalog:
120, 120B, 14E, 225, 229, 3304, 3304B, 3306, 3306B, 3516C, 528, 539, 55, 57, 58, 583H, 583K, 594, 594H, 641, 650B, 651, 657, 666, 666B, 7271, 75, 815, 816, 914G, 950, 953D, 963B, 963D, 966C, 977H, 977...
120G, 12G, 130G, 140G, 14G, 1676, 16G, 225, 225D, 229D, 231D, 235, 235C, 245, 245B, 30/30, 304, 305, 305.5, 306, 307E, 308E, 308E CR, 308E SR, 3126, 3304, 3304B, 3306, 3306B, 3406B, 3408, 3412, 3412C,...
16G, 16H NA, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3456, 375, 375 L, 5080, 578, 583R, 587R, 621B, 621E, 621F, 621G, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631D, 631E, 631G, 63...
1161432
COUPLING
RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
1655559
COUPLING
CS-431C, RM-350B
CS-431C, RM-350B
0076808
COUPLING-PIPE
RM-250C, RM-350B, RR-250B
RM-250C, RM-350B, RR-250B
3932661
COUPLING
RM-300, RM-500, RR-250B
RM-300, RM-500, RR-250B
1520601
COUPLING
RM-350B, RR-250B, SM-350
RM-350B, RR-250B, SM-350
2646098
COUPLING AS
RM-500
RM-500
1914839
COUPLING
RM-300, RM-350B, RM-500
RM-300, RM-350B, RM-500
1916018
COUPLING AS
RM-300, RM-350B, RM-500
RM-300, RM-350B, RM-500
4238733
COUPLING
RM-500
RM-500
1388766
COUPLING GP-TORQUE LIMITING
RM-350B, RM-500
RM-350B, RM-500
1207632
COUPLING GP-TORQUE LIMITING
RM-250C, RR-250, RR-250B, SS-250
RM-250C, RR-250, RR-250B, SS-250
1G4110
COUPLING GP-PUMP
CB-224C
CB-224C
1180411
COUPLING GP-FLEXIBLE
RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
5E7593
COUPLING GP-PUMP
CB-521, CB-525B
CB-521, CB-525B
5E7774
COUPLING GP-PUMP
CB-214B
CB-214B
5E5585
COUPLING GP
CB-214B
CB-214B
5E6633
COUPLING GP-PUMP
CS-643
CS-643
1531356
COUPLING GP-TORQUE LIMITING
RM-350B, RM-500
RM-350B, RM-500