COUPLING AS 1530796 - Caterpillar

Table 4
Onboard VIMS Configuration Software for the 5230A+ (FS and ME) - VIMS Source 151-1293    
5230A+    Pt. No. of Current Software    Pt. No. of New Software    Language (English)    Chip Detector    System Air Pressure    Retractable Ladder    Ambient Temp    
Front Shovel     195-2209     248-0850     Spanish         X     X     X    
Front Shovel     195-2210     248-0851     Spanish     X     X     X     X    
Mass Excavator     195-2211     248-0852     Spanish         X     X     X    
Mass Excavator     195-2212     248-0853     Spanish     X     X     X     X    Installation of the 221-3410 Pressure Sensor Gp
Table 5
Needed Parts    
Part Number     Description     Quantity    
6V-0484     O-Ring Adapter     1    
3E-7410     O-Ring Tee     1    
6V-8398     O-Ring Seal     1    
3J-1907     O-Ring Seal     4    
221-3410     Pressure Sensor Gp     1    
233-3748     Harness     1    
Disconnect the Swing Brake hose and the adapter from the manifold valve.
Install a 3J-1907 O-Ring Seal onto a 3E-7410 O-Ring Tee. Install the 3E-7410 O-Ring Tee into the manifold.
Install a 3J-1907 O-Ring Seal onto the adapter that was removed from the manifold valve (Step 1). Install the adapter onto the 3E-7410 O-Ring Tee .
Install a 6V-8398 O-Ring Seal into the adapter. Reconnect the hose to the adapter.
Install 3J-1907 O-Ring Seal on 6V-0484 O-Ring Adapter. Install the adapter into 3E-7410 O-Ring Tee .
Install a 3J-1907 O-Ring Seal onto a 221-3410 Pressure Sensor Gp. Install the 221-3410 Pressure Sensor Gp into the 3E-7410 O-Ring Tee.
Connect the 221-3410 Pressure Sensor Gp to the three-pin connector on the 233-3748 Harness As.
Route the 233-3748 Harness As from the 221-3410 Pressure Sensor Gp to the MAC-14. Secure the harness with straps or with p-clamps, as required.
Connect the 233-3748 Harness As to the MAC-14 as follows:
On the J-1 connector on the MAC-14, remove the "116 Brown" wire from Position "1".
Install the "116 Brown" wire into Position "A" of the 155-2269 Connector Plug (included with the 233-3748 Harness As ). Secure with a 155-2261 Plug Lock Wedge (also included with the 233-3748 Harness As ).
Connect the 155-2269 Connector Plug into the 2-pin receptacle of the 233-3748 Harness As .
Insert the "116 Brown" wire from the end of the 233-3748 Harness As into Position "1" of the J-1 connector (MAC-14). The remaining wires from the 233-3748 Harness As plug into the MAC-14 connector as shown in Table 6.
Table 6
233-3748 Harness As /MAC-14 Connections    
Harness Wire #     Color     MAC-14 Connector     Position    
116     BR     J-1     1    
G939     PK     J-1     15    
G939     PK     J-2     24    
G424     GN     J-2     35