COUPLING 1586601 - Caterpillar

The Electronic Monitor Panel will activate. Then, the monitor will display the output that is received from the controller. The Controller Service Program is divided into five functions. Each function is listed:
Alerting the presence of abnormal engine operation
Displaying the machine conditions (engine speed, hydraulic oil temperature, power shift pressure, etc)Service codes: 10 to 21.
Displaying the existing electronic problems or the past electronic problems Service codes: 18, 19, 1c, 1d
The electronic control components are adjusted and tested. The adjustment codes are listed: 70 and 71. The test codes are listed: 60, 61, 62, 66 and 67.
Changes in various defaults in the controllerService codes: 80 to 8AYou should depress the switches on the monitor panel in order to start up the service program or the switches are depressed in order to change the functions. The corresponding switch and/or switches should be depressed until the required function is displayed on the character display. Start-Up Of The Service Mode
Illustration 2 g00662936
Electronic Monitor Panel (2) Character display (22) Travel alarm cancel switch (23) Boom priority mode switch (24) Swing priority mode switch (25) Fine control mode switch (26) User mode switchNote: The engine can be running or the engine can be stopped, when the "Service Mode" is started. When the engine is stopped, the starter switch must be in the ON position. You should know the procedure to start up the "Service Mode" in advance.
The following switches should be depressed and held for 2 seconds or more simultaneously: travel alarm cancel switch (22), fine control mode switch (25) and user mode switch (26) .
The time display and the dial display on the character