COUPLING 2P5769 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g02367201
Install clean screen assembly (16) into turbocharger support (18). Install new O-ring seal (17).
Illustration 2 g02367198
Attach Tooling (A) and a suitable lifting device onto turbocharger (9). The weight of turbocharger (9) is approximately 125 kg (275 lb). Position turbocharger (9). Install bolts (8).
Tighten clamps (11), (15), and (10).
Position tube assemblies (7) and (12) together. Connect fittings (14) and (13) to turbocharger (9).
Illustration 3 g02366696
Install rear vertical shields (5). Install two front vertical shields (3). Install slanted shield (4). Install RH side shield (6) and then LH side shield (2). Install half moon shields (1). End By:
Install the air cleaners.